Model: | JXSPC |
---|---|
Brand: | LUCKY/OEM |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / New Energy / Solar Energy |
Label: | solar collector , fission , heat pipe |
Price: |
US $199
/ pc
|
Min. Order: | 1 pc |
Last Online:16 Aug, 2013 |
CE EN12975 KEYMARK Split Pressurized Solar Water Heater
CE EN12975 KEYMARK Split Pressurized Solar Water Heater General Info.:
The JXSP-SERIAL solar system is combined with solar collector, pressurized storage tank, intelligent controller, solar station, expansion vessel, pipeline etc.
1. Collector: JXSPC-SERIAL, JXSC-SERIAL, or U pipe collectors
2. Tank: pressurized tank, 100L-1500L
3. SP-106, SP116, SP328, SR962, SR962 …solar working station.
4. SR868, SR868C8Q…temperature differential controller
CE EN12975 KEYMARK Split Pressurized Solar Water Heater Working principle:
CE EN12975 KEYMARK Split Pressurized Solar Water Heater Premium Solar Collector Specification:
Three-target Vacuum Tube Performance and Specification: |
||
Tube structure |
All-glass double deck co-axial structure |
|
Glass material |
High borosilicate 3.3 glass |
|
Outer tube diameter and glass thickness |
Ø58±0.7mm; Glass thickness 1.6±0.15mm |
|
Inner tube diameter and glass thickness |
Ø47±0.7mm; Glass thickness 1.6±0.15mm |
|
Tube dimension |
58*1800mm |
|
Absorption
|
Coating material |
CU/SS-ALN(H)/SS-ALN(L)/ALN |
Sediment method |
Three Target magnetron sputtering plating |
|
Absorptivity |
α =0.92~0.96 (AM1.5) |
|
Emission ratio |
Emission: ε=0.04~0.06(80°C±5°C) |
|
Vacuum degree |
P≤5.0X10-3(PA) |
|
Stagnation temperature (temperature inside of empty evacuated tubes) |
260~300 °C |
|
Average heat loss |
ULT 0.4~0.6 W/(m2 *°C) |
|
Hail resistance |
Ø25 mm |
24mmPremium Heat Pipe Performance and Specification: |
|
Heat pipe material |
Oxygen free copper (TU1),Cu=Ag>99.99%(o2<16ppm) |
Condenser dimensions |
Top: Ø24mm *65mm,Body: Ø8*0.6mm.length:1750± 10mm
|
Heat-transfer-fins |
0.3mm/0.0098’’ thick sets of Aluminum fins,1630mm |
Starting speed |
30s |
Max. operation pressure |
6bar |
Max. testing pressure |
12bar |
Stagnation temperature |
236°C |
Manifold Performance and Specification: |
|
Manifold header pipe |
TU2 copper |
Manifold casing |
Anodized aluminum alloy (6063-T5/T6) |
Insulation layer |
Compressed rock wool. |
Bracket Performance and Specification: |
|
Bracket |
Stronger galvanized steel structure |
Vertical installation angle |
Flat roof 0~700 |
Other Components Performance and Specification: |
|
58 dia. Anti dust rubber ring |
Cymene ethylene silicon rubber(110) |
58 dia. White inner stopper of heat pipe |
Cymene ethylene silicon rubber(110) |
58 dia. Tube holder |
Nylon 1013-(B) |
58 dia. Tube holder cover |
Nylon 1013-(B) |
End cover for manifold |
Nylon 1013-(B) |
Left seal ring |
Silicon rubber(110) |