Three-shaft Thread Rolling Machine , ZC28-6.3
Product Description
| Three-shaft Thread Rolling Machine |
| Model |
ZC28-6.3 |
| This is a thread producing machine which uses its three thread rolling dies, mounted in the same separation |
| angle of 120°,to realize roll forming of the work piece, for metal has the performance of plastic |
| deformation under the pressure operation. |
| It is not only used for roll forming of normal thread work piece, but also applied to thin-walled thread |
| work and special-shaped work. |
| Generally speaking, material for roll forming should be carbon steel, alloy steel or some non-ferrous metal, |
| with elongation>10%,tensile strength<1000MPa,and hardness |
| maximum rolling pressure |
63KN |
| diameter of main shaft |
45mm |
| maximum width of rolling die |
60mm |
| minimum center distance |
43mm |
| feeding speed |
0.1~4mm/s |
| speed of mineshaft |
44\66\92\137r/min |
| gross power |
8kw |
| maximum inclination of main shaft |
±6° |
| maximum diameter of rolling die |
155mm |
| maximum center distance |
95mm |
| Max. rolling dia. |
120mm |
| maximum diameter range |
14-42mm |
| maximum thread pitch |
3mm |
| net weight approximate |
7000kg |
| overall size |
2100 x 2200 x 2300mm |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
