PU car surrounded by a large release agent
Product Description
FDC-3322 release agent
|
 |
| |
|
FDC-3322 is water-based release agent, water as the dispersion medium, does not contain any toxic and hazardous substances. The production Product dispersion, and easy to spray, easy to use, stripping power small. No corrosion on the mold surface, no scaling
Phenomenon, easy to clean.
Technical indicators
| Appearance |
Cream
|
|
N/100cm2 Stripping force N/100cm2
|
≤40 ≤ 40
|
|
Stripping sole appearance
|
Smooth surface integrity
|
Usage:
1, first with the appropriate solvent or cleaning agent and thoroughly clean mold release agent to remove residual or previously
Other pollution, and then a clean cloth or towel.
2 (diluted after a good release agent) using non-air or air-assisted spray equipment, brush can be used
Brush or cotton cloth wipe test.
3, in the pre-processing or clean the mold, spray 2-5 times even the FDC-3322 to completely release agent
Covered in mold.
4 After each ejection, then cover the whole mold a layer of FDC-3322, to ensure good off
Model effects.
Storage and Handling:
1, the FDC-3322 stored at 0 ~ 35 º C, to ensure the best results.
2, when not in use keep containers sealed sealed to prevent contamination.
|
|
 |
Product Image
Img 1
Img 2
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
