| Model: | A20MS，A30MS |
|---|---|
| Brand: | WALKER |
| Origin: | Made In United Kingdom |
| Category: | Industrial Supplies / Machinery / Filters |
| Label: | WALKER , A038MS , Sterilizing filter |
| Price: |
US $294
/ pc
|
| Min. Order: | 1 pc |
| Last Online:17 Jun, 2024 |
WALKER MEDICAL STERILE FILTERS
Model series: A20MS, A30MS, A55MS, A76MS, A106MS, A153MS, A203MS
WALKER's antibacterial filters are specially designed for medical compressed air such as hospitals. This type of filter meets all requirements of the HTM2022 medical gas pipeline system standard. Antibacterial filters are made of high quality materials. Before leaving the factory, this filter has been fully tested according to the iso 9001 standard, and Walker's antibacterial filter can filter the particles to 0.01 micron, and the penetration of DOP is less than 0.0001%. Its shell is made of die casting aluminum, with a maximum withstand pressure of up to 16 bar, or 232 pounds per square inch, and a 1/4 inch manual drain valve. The inner surface of this Walker filter is treated with electrophoresis coating, and the outer surface is sprayed with a layer of blue polyester to prevent corrosion. There is, of course, a standard differential pressure gauge. The differential pressure gauge is configured to continuously monitor the use of the filter, and it will prompt you to replace the filter at the best time. SR filter is suitable for use after high pressure bacteria treatment.
The technical specifications of WALKER's antibacterial filter
1. Walker medical sterilization filter is made of aluminum alloy with CE mark.
2. Comply with the BSP cone-thread connection of iso7/1 or the NPT connection of ANSI B2.1 (if used in North America).
3. The filter core of Walker's antibacterial filter is stainless steel, and the air outside flows inside through the entire filter core.
4. The anti-bacterial filter model A20MS and A30MS have pressure gauges, from model A55MS to A308MS with differential pressure gauge, model 55DPIW, see the medical gas pipeline system HTM2022 standard.
5. Walker model A20MS and A30MS have visual glass to check the accumulation of condensate water.
6. Manual drain valve, model MDV25 for all models.
7. All models of WALKER's anti-bacterial filter are attached with mounting bracket, see the accessory product page.
8. All the filter shells are treated with electrophoresis and then coated with a layer of blue polyester powder to prevent corrosion.
9. WALKER medical sterilization filter cannot be used for water and saturated oil.
10. The highest steam sterilization temperature of antibacterial filter is only related to the filter core. SR filter core can be disinfected 50 times. According to BS 3970 standard, each filter should be sterilized before use.
