Model: | MY400 |
---|---|
Brand: | cimlineya |
Origin: | Made In China |
Category: | Construction & Decoration / Building Sealing |
Label: | road machine , cracksealing , cracksealer |
Price: |
-
|
Min. Order: | - |
Last Online:10 Apr, 2018 |
Explanation of MY400 Cracksealer Key parts:
Flame
This machine is pull type. It can be trailed on the pavement safely. Every machine is built with 15cmx5cm rectangular corrosion resistant tube steel frame. The diameter of pull ring is 6cm, the height ofit can be adjusted in 38-76cm. The fenders are flat for sealant blocks ready to load and solid enough to take the weight. This can reduce the labor intensity and lead to the convenient operation. An screw jack which can supported about 2270kg weight is stand by this machine.
Fast hot up melter
The special geometry combustion chamber and less heat transfer oil make efficient heating and continuous working.
Re-circulation heating system
Internal material recirculation draws hot sealant from the bottom of the tank and continuously circulates the material back to the top. The continuous recirculation extends material pump life and provides superior mixing over non-recirculation designs.
The special design of combustion chamber
There is 45 degree of the combustion chamber. By spreading the flame out without actual contact with the tank walls, more aire is super-heated and the melting process is acclerated. Because of the fewer contacting with flame the chamber life is more longer. Our bolt-on firebox can be sripped only a couple of wrenches.
Engine
YAMMAR engine , 25.4HP water cooled diesel. The performance is perfect is cooling and sound insulating.
Heated hose
The length of heated hose is 6 meters and the core of it is made from nickel which leads to the better performance in life and bending than competitors. You can get more 33.3% working area when compared with competitors hose of 4.5 meters long.
Sealing wand
The sealing wand is light and convenient for using . Material comes out fluently from the hose and controlled by a ball valve. The 270 degree working area can be catched by active wand support.
Smoke exhausting system
Advanced design of smoke exhausting system can reduce the harmful gas from tank and protect safety of environment and the operator.
Material pump
An external matrial pump promotes safety and minimal maintenance. The pump is easily serviceable in the field and can be replaced in less than three hours . There is more 13% working volume than the submerge pump.
Hydraulic system
The pump and agitator system are controlled by a centralized manifold . A glance at the hydraulic level sight gauges tell you in an instant that primary fluid is in good order.