Ordinary carpentry engraving machine
JX-1325 Main Characteristics:
1. Italy Well-known air cooling spindle,high precision,long life time,steady working,easy to start up.
2. Thicken square pipe structrue,well welded,no distortion for whole structure.
Adopt imported square orbit,double slippers.Bearring heavy,working steadily,high precision,and long life time.
3. DSP controller system with USB interface,working without connecting with computer during working and easy to control.
4. Software:CAD/DAM designing software eg Type3/ArtCAM/Castmate/Wenta ect.
Vacuum Table with 6 vacuum zones,which can adsorb different sizes materials.Options for vacuum pump:vacuum pump made in China or No-oil vacuum pump made in Germany.
5. Auto Oilliung system.Easy to operate by pressing one key.
6. Adopt high speed stepper motor and drivers,and two motors for Y axis,Max speed is 25m/min.
7. Auto Aligning System.Seperated control system makes operation easily.
8. option:Ratery Clamp to engrave on Columns.Max is dia 36cm and length 10cm.
Parameter:
X Y working area: 1300×2500mm
Z working area : 200mm
Table size : 1480×3000mm
Max feeding : >25m/min
Work-holding: by suction
Processor : DSP/ 100MHZ
Interface: USB
command : G code*.uOO*mmg*.plt
Surroundings for software : DSP
Power(not onduct the spindle) : 1840W
Power : 380V 50Hz
Main axis power rate 4.5/6Kw
Main axis rotating speed 0-24000rpm/min
Work Mode:Steper
|