Model: | FC-PA1200 |
---|---|
Brand: | - |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | - |
Price: |
-
|
Min. Order: | 1 pc |
Last Online:05 Dec, 2011 |
2. Midpoint drift protection: Original power amplifier only starts to protect till the midpoint drift exceed 1 to 1.5V, but at that time, there is DC get through the speaker, it is not safe for the speaker. The protection circuit of the mentioned models are so sensitive that even start the protection function when there is small DC input, this prevents damage caused by heavy current.
Model | PA-1200 | |
Power utput
1KHzRMS THD≤0.1% |
Stereo Power8Ω | 250W+250W |
Stereo Power4Ω | 420W+420W | |
Stereo Power2Ω | 720W | |
Bridged Power 8Ω | 720W | |
Frequency Response | 20Hz-20KHz -0.5dB | |
Input Sensitivity | +4dB (1.23V) | |
Balance Input Impedance | 94KΩ | |
Unbalance Input Impedances | 47KΩ | |
S/N Ratio | >96dB | |
Channel Separation | >95dB | |
Damping Factor | >800 | |
Slew Rate | >50V/uS | |
Protection | Fuse; short circuit, speaker protection | |
soft turn on/ turn off (without
level elimination) |
||
LED Indicators | Power (blue), protection
(yellow), clip (red) |
|
Signal (green), bridge (rear
panel red) |
||
Cooling System | Vent for efficient cooling, fan
with little noise |
|
Front Panel Controls | CHA LEVEL/ CHB LEVEL
controls, power switch |
|
Rear Panel Mode Switch | Stereo/ parallel/ bridge option
switch, ground switch |
|
Connector | XLR INPUT and LINK, binding
posts for connecting speakers |
|
Power Supply | AC115V-230V/50-60Hz | |
Amplifier Type | AB | |
Product dimensions | 480x426x89(WxDxH mm) | |
shipping dimensions | 610x570x185(WxDxH mm) | |
G.W | 19KG | |
N.W | 22KG |