Model: | - |
---|---|
Brand: | FEATURE-TEC |
Origin: | Made In China |
Category: | Industrial Supplies / Machinery / Filters |
Label: | String Wound Cartrid , Filter Cartridge , ire wound cartridge |
Price: |
-
|
Min. Order: | 1 pc |
Last Online:12 Jul, 2023 |
String Wound Cartridge is made of fibre wound around a porous framework, after carding & spinning into roving they are wound into cartridges with carefully controlled micron rating. From raw materials to finished products, we are control the quality and filtration characteristics.
Feature-tec specially designs a patented internal frame with spiral welding structure to solve the disadvantage of easily getting deformed in normal string wound cartridge so as to ensure filtration rigidity. The cellular structure with compact inside and unconsolidated outside and gradient filtration pore structure effectively avoid side leakage and traditional disadvantages in normal string wound cartridge so as to reduce pressure drop, increase pollutants holding capacity and ensure high filtering accuracy. Due to this special structure, the cartridge can effectively filter suspended micropollutants or particles from liquid or gas and is normally used for filtering liquid with low viscosity and low impurity content. It is widely applied for organic solvent and plating solution treatment in food & beverage and electronics industries, and industrial oil filtration in petrochemical, pharmaceuticals, hydraulic oil and lubricating oil industries.
String Wound Cartridge Product features:
The cellular structure with compact inside and unconsolidated outside can realize deep filtration of liquid to effectively remove impurities;
Gradient filtration pore structure ensures maximum filtering accuracy;
According to the requirements of the operating environment, customers can:
choose spiral welding framework to ensure element has sufficient stiffness, suited for high pressure differential environment.
choose from a range of material with good compatibility for specific filtration fluid
choose from a range of pore diameter for specific needs
choose from a range of sizes for the connections, from Size 222 to 226
choose from single-opening for higher filtration accuracy or double-opening for a lower requirement
Non-standard design is available according to customer’s actual operating environment.
String Wound Cartridge:
Bleached cotton string wound cartridge
Advantages: made of sanitary food-grade material;
High porosity factor and pollutants holding capacity.
Application examples: beverage, aromatic solvent, water treatment, photographic film, lubricant, edible oil and pharmacy
Fiber glass wound cartridge
Advantages: resistant to temperature > 300℃and suitability for high temperature medium;
Strong chemical compatibility and suitability for various filtration environments;
Application examples: conduction oil and high temperature flux
Nylon string wound cartridge
Advantages: strong chemical compatibility and capability of filtering various organic solvents
Application examples: wastewater, organic solvent
Primary performances:
Accuracy and flow rate
Accuracy and flow rate |
|||||||
Filtration accuracy(um) |
1 |
3 |
5 |
10 |
20 |
30 |
50 |
Maximum flow rate(L/m) |
9 |
12 |
18 |
30 |
37 |
42 |
44 |
Note: the measured cartridge length is 250mm,pressure difference is 0.02MPa,tested medium is clean water and temperature is room temperature.Use these parameters to deduce flow rate of other cartridges
Code:
Filter element type |
Filter material |
Filtration accuracy(um) |
Filter element outer diameter |
Filter element length |
Inner element material |
Filter element connection type |
CW-string wound cartridge |
BC-bleached cotton |
0.5 |
R-1.5" S-2.5" |
05-5" 10-10" 20-20" 30-30" 40-40" 50-50" 70-70" ... 80-80" |
P-polypropylene |
7-dual opening 6-222type with wing tip 4-226type with wing tip |
FP-food-grade polypropylene |
1、3、5、10 |
T-2" |
E-304stainless steel |
|||
EP-industrial polypropylene |
15、20、25 |
F-2 3/8" |
S-316stainless steel |
|||
NY-nylon |
30、50、75 |
P-3" |
F-fiber glass Strengthened polypropylene
|
|||
PE-polyester |
100、125 |
BB-4.5" |
||||
FG-fiber glass |
150、200 |
|
Application examples:
Industry |
Water treatment |
Chemical |
Beverage |
Chemical engineering |
Food |
Electronics |
Machinery |
Filtering environment |
Prefiltering |
Paint |
Prefiltering |
Conduction oil |
Syrup |
Plating solution |
Cutting liquid |