Launch CNC 602A Injector Cleaner & Tester
Product Description
Launch CNC 602A Injector Cleaner & Tester Feature:
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors, to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* n-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Specification
Working conditions:
* Temperature: -10~+40C;
* Relative humidity: less than 85%;
* Intensity of outer magnetic field: less than 400A/m;
* No naked flame within 2m.
Specifications:
* Power supply: AC220V±10%, 50/60Hz; AC110V±10%, 50/60Hz.
* Main unit power: 200W;
* Ultrasonic cleaner power: 100W;
* imulated RPM range: 10 990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4000ml;
* Dimensions: 400mm×410mm×580mm;
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,