thread rolling machine is used to make parallel thread on rebar head with diameter from14mm-40mm.we have kinds of JBG-40K JBG-40B JBG-40D JBG-50 thread rolling machine. Easy to operate and quick to make parallel thread on head of rebar. Our products are cheap and have good quality.
Thread rolling machine technical data
JBG-40K
It not only adjusts freely in the range 14-40mm using the rib-stripping plate but also eliminates the problem that the rebar head with screw head often becomes bigger, further guaranteeing the construction quality.
Electric motor power: 4KW gross weight: 500KG
Work voltage: 3-380V 50HZ dimension: 1250*1050*750mm
Rotate speed: 60r/min steel bar standard: 14-40mm
Thread pitch: 2.5 3.0 3.5 max thread length: 65mm
JBG-40D
It is easy to adjust; it adds the screw pitch angle mechanism. It is especially fit for the rebar splicing in bridge-piles and tunnel construction
Electric motor power: 4KW gross weight: 450KG
Work voltage: 3-380V 50HZ dimension: 1250*1050*750mm
Rotate speed: 60r/min steel bar standard: 14-40mm
Thread pitch: 2.5 3.0 3.5 max thread length: 100mm
JBG-40B
It features that in the same pitch range, the rib-stripping plate can be adjusted freely. The rebar head with screw thread is standard, precise and the service life of the machine is extended.
Electric motor power: 4KW gross weight: 500KG
Work voltage: 3-380V 50HZ dimension: 1250*1050*750mm
Rotate speed: 60r/min steel bar standard: 14-40mm
Thread pitch: 2.5 3.0 3.5 max thread length: 65mm
Client’s special demands are available.
