| Model: | BRO5000 |
|---|---|
| Brand: | BROTEK |
| Origin: | Made In China |
| Category: | Transportation / Car Accessories / Car Audio & Video |
| Label: | OLT , EPON , GEPON |
| Price: |
-
|
| Min. Order: | 100 pc |
| Last Online:12 Mar, 2015 |
Closely follow EPON technology development, 5U rack-mount OLT based on the latest EPON standard. BRO5000 is the rare high integrated EPON system equipment which integrates both L2 / L3 switch function and belongs to telecom-level access equipment. Making use of optical fiber network for all kinds of users, such as home users, enterprise users, etc, realizing the maximum bandwidth reaching to 1 Gbps for one user. Every uplink port of BRO5000 can be up to 1Gbps. The maximum bandwidth of the uplink card XGM2A can be 10Gbps. It also support high-speed internet, IPTV multicast/VOD. BRO5000 provides forty uplink ports to IP core network and at the same time provide as many as 40 downlink ports. Each port on the single fiber supports 32/64 optical splitters according to users’ requirement. The single OLT can support 1280/2560 ONU. Transmission distance can reach to 20 km. Its height is only 5U. Meet various application scenarios, such as FTTH/FTTB/FTTC, etc.
Hardware
BRO5000 contains the following parts:
One rack for installing the follow parts
CSM1A: (Control and Switch Module), 4GE uplink ports. BRO5000 can be insert into 2 pieces for main backup
XGM2A: 10G Eth card for uplink (Optional). at most BRO5000 can be inserted into 2 pieces
GEM4A: 1G uplink card, BRO5000 can be inserted into 10 pieces.
ELM4A: EPON Module, at most BRO5000 can be inserted into 10 pieces
PWA1A: AC Power Module, 2 pieces
PWD1A: DC Power Module, 2 pieces
FAN1A: Fan
Dust –proof filter
BKP: Back plane
Technical Parameters
|
Model No. |
BRO5000 |
||
|
Pon Feature |
Slots |
Ten slots for service boards, 2 slots for CSM1A, 2 slots for power supply, one slot for fan. |
|
|
Console |
Each CSM1A provide one RS-232 and one RJ-45 connector |
||
|
GE board |
Two kinds of uplink boards: two 10G ports or four 1GE ports |
||
|
Support SFP module, and can use the electrical or optical module |
|||
|
EPON boards |
At most support 10 pieces EPON boards, each board provides 4 PON ports |
||
|
EPON OLT Port Capacity |
At most 40 PON ports; at most support 2560 ONU if use PLC splitter 1:64. |
||
|
Optical Port |
Epon Standard |
IEEE802.3ah |
|
|
Fiber |
SMF fiber, G.652 |
||
|
EPON OLT Port connector |
SC/SFP |
||
|
Maximum splitting ratio |
1:64 |
||
|
EPON link bandwidth |
Uplink and downlink 1.25 Gbps |
||
|
Estimated optical loss |
29dB, maximum distance 20km |
||
|
Wavelength |
Downlink: 1490 nm; Uplink: 1310 nm |
||
|
ONU User Authentication |
IEEE802.1x Radius authentication or the local authentication |
||
|
DBA(Uplink) |
The maximum bandwidth and assured bandwidth based on LLID |
||
|
L2 Switch function |
Switch Capacity |
176Gbps Full duplex line speed exchange |
|
|
Nonblocking switch |
High performance line speed forward and IP routing |
||
|
Flexible MAC addresslearn |
Independent VLAN learning (IVL) Address learn based on hardware L2 forwarding table based on software 32K L2 Unicast table |
||
|
VLAN |
802.1Q VLAN 4094 tagged (802.1Q) VLANs Entrance filter system based on 802.1Q QinQ(EPON chip is based on VLAN STACK of LLID) |
||
|
MSTP |
IEEE802.1s, accord with STP,RSTP |
||
|
Link Converge |
IEEE 802.3ad |
||
|
Package Mirror |
Mirror based on the port: entrance, exit, entrance and exit |
||
|
Package buffer and advanced flow control |
HOL Jam prevention based on Cos Support back pressure Support suspended frame |
||
|
QoS |
Service type(CoS) |
Support at most 8 CoS queues at each output port Support 802.1Q priority, ToS/DSCP Supported queue system: Strict law, weighting method Support IPv4 TOS priority remapping Support IP Precedence, QoS Tag, DSCP |
|
|
Speed control of output port |
Token bucket function from 1 Mbps~1 Gbps Broadcast, multicast and DLF speed control based on port |
||
|
Security |
Login |
Use username and password |
|
|
ACL |
Strategy based on all kinds of protocol, source/target IP, source/target TCP/UDP port number and ToS combination |
||
|
Support permit, deny and ToS remarking |
|||
|
L3 Route Proticol |
ICMP |
RFC 0792, Internet Control Message Protocol. |
|
|
ARP |
RFC 0826, Ethernet Address Resolution Protocol. |
||
|
Proxy ARP |
RFC 1027, subnet gateway transparent application ARP |
||
|
DHCP relay |
RFC 3046, option 82 |
||
|
DHCP server |
RFC 2131,2132. At most 12k entry capacity, and 128 MAC address pool |
||
|
IGMP |
RFC 2236, Internet Group ManaXGM2Aent Protocol， Version 2 |
||
|
Routing |
Static IP Routing ( The default router) |
||
|
Multicasting |
IGMP Proxy |
||
|
IGMP Snooping |
|||
|
PIM SM |
|||
|
Network Management |
CLI |
Telnet or Console |
|
|
FTP |
RFC 959，File Transfer Protocol |
||
|
Telnet |
RFC 0854，Telnet Protocol Specification |
||
|
SNMP |
V2.0，Simple Network ManaXGM2Aent Protocol |
||
|
Working Environment |
Operating Temp:0~+50℃ |
||
|
Relative Humidity:5%~90% non-condensing |
|||
|
Storage Humidity: 75% (Maximum) |
|||
|
Storage Temp:-40~+75℃ |
|||
|
Power Supply |
AC power supply slots, input voltage 110/220V DC power supply slots, input voltage -48V (-40V~-72V DC) |
||
|
Power Consumption |
CSM1A: 65W(2*) |
||
|
ELM4A: 20W(10*) |
|||
|
GEM4A:<10W(10*) |
|||
|
XGM2A:<20W(2*) |
|||
|
FAN1A:<36W(1*) |
|||
|
PWA1A:<45W(2*) |
|||
|
PWD1A(DC):45W(2*) |
|||
|
Completely equipped 350W(two pieces of CSM, ten pieces of ELM4A, two pieces of PWD1A and one fan) |
|||
|
Dimension |
482.6*333* 221.5mm (L * W * H) |
||
|
Weight |
Rack(FAN+Back plane): 15kg |
||
|
CSM1A board: 0.7kg |
|||
|
XGM2A board: 0.5kg |
|||
|
GEM4A board: 0.5 kg |
|||
|
ELM4A board: 0.5kg |
|||
|
Power supply: 1kg |
|||
|
Certificates |
FCC Class B, CE, ROHS |
||
