| Model: | BRO308 |
|---|---|
| Brand: | BROTEK |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Telecommunication & Broadcasting / Other Communication Equipment |
| Label: | ONU Terminal Device , EPON |
| Price: |
-
|
| Min. Order: | 100 pc |
| Last Online:12 Mar, 2015 |
BRO308 a high cost performance ONU terminal device. (Indoor and outdoor. Gigabit Ethernet/Passive optical network). Provide eight 10/100M base-t Ethernet port and one PON port to transmit voice, data and video, etc. Installation is convenient and flexible. Meeting FTTH/FTTB/FTTC, etc. various kinds of application scenarios.
Key features
1. Completely compatible with EPON international standard IEEE802.3ah/802.3-2005
2. Support China Telecom EPON CTC2.1 standard and expand OAM
3. Support triple churning encryption requested by China Telecom
4. Support DBA reporting mechanism requested by China Telecom
5. Support OAM (Link，Test，Loop back）maintenance function defined IEEE802.3ah
6. Support the remote upgrade and download
7. Support status detection and fault report
8. Support to save configured parameters if power down
9. Support to configure the work mode at the user port
10. Support MDI-MDIX automatic-detection at the user port.
11. Support data encryption and decryption
12. Support access authentication based on serial number
13. Support access authentication based on MAC address
14. Support 802.1Q VLAN
15. Support IGMP Snooping
16. Support traffic rule to modify the related priority.
17. Support LED indication
18. Support to restore the factory settings
19. Support the remote reset and reboot
20. Support dying gasp outage alarm
Technical Parameters
|
Model No. |
BRO308 |
|
Standard |
IEEE 802.3ah |
|
IEEE Std 802.1D, 1998 Edition, Media Access Control (MAC) Bridges |
|
|
Optical Feature
|
Support WDM, single fiber two-way transmission |
|
Interface type: SC/UPC |
|
|
Maximum splitting ratio: 1:64 |
|
|
Speed: 1.25Gbps symmetry at the upper and lower |
|
|
Sent wavelength: 1310 nm |
|
|
Received wavelength: 1490 nm |
|
|
Optical output power: -1~+4dBm |
|
|
Receiving sensitivity: < -25dBm |
|
|
The farthest distance between OLT and ONU is 20km |
|
|
Layer 2 Switch function
|
Support IEEE 802.1q VLAN |
|
Support speed rate inhibition of broadcast and unicast packet at ONU |
|
|
IEEE 802.3x flow control |
|
|
Support IGMP Snooping: support 16 multicast addresses at each LAN port |
|
|
Security Strategy |
MAC address is the automatic registration mark at ONU end |
|
Support plug and play, automatically register at ONU end |
|
|
Support access authentication based on serial number |
|
|
Management Maintenance |
Support the remote management from OLT to ONU, support SNTP and Log |
|
Upgrade software remotely |
|
|
Support to save configuration parameters when power down |
|
|
LEDs |
PWR-LED: Power supply status |
|
LINK1-LED:GE connection status |
|
|
PON-LED: PON line connection status |
|
|
LOS-LEED: Optical port alarm status |
|
|
Working Environment |
Operating Temp:-20℃~+60℃ |
|
Relative Humidity:5%~95% non-condensing |
|
|
Storage Humidity: 75% (Maximum) |
|
|
Storage Temp:-40~+75℃ |
|
|
Power Supply |
100V ~ 240VAC, 50/60HZ |
|
Power Consumption |
Maximum: ≤ 7 W |
|
Dimension |
285*110* 35.0mm (L * W * H) |
|
Weight |
<2.0kg |
|
Certificates and Relative standard |
CE, ROHS6, CCC, etc |
|
EMC/EMI: Compliance with VCCI Class B, FCC Part 15 B |
|
|
Security: Compliance with UL 60950 safety specification |
|
|
Compliance with ITU-T K.21 |
