KV9 Glass Flat Edger & Variable Miter Machine
1. Brief Introduction:
1.1. This glass edger and variable miter machine is able to grind and polish the miter angles of the glass, with bottom edge polishing and rear seaming all at the same time.
1.2. The control system of this glass miter machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor adopt timing belt which can improve the transmission precision.
1.4. The processed glass surface is very bright and smooth, approaching the original glass surface.
1.5. The mitering angle of the glass machine ranges from 0 to 60 degree.
2. Technical Parameters
1. Processing glass thickness: 3~~25mm
2. Miter angle: 0°~~60°
3. Min size processing glass: 80mm×80mm
4. Processing speed: 0.75~~3.75m/min
5. Installation power: 20.3KW
6. Size: 7800 x 1400 x 2500mm
KV11a Glass Flat Edger & Variable Miter Machine
1. Brief Introduction:
1.1 This glass mitering edging machine is able to process and polish all miter edge, bottom edge and arris on glass at one time. There are 3 wheels for each arris.
1.2. The control system of the glass mitering edging machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor of the machine adopt timing belt which can improve the transmission precision.
1.4. The mitering angle ranges from 0 to 60 degree.
1.5. Different options: Digital display, PLC.
2. Technical Parameters:
1. Processing glass thickness: 3~~28mm
2. Miter angle: 0°~~60°
3. Min size processing glass: 80mm×80mm
4. Processing speed: 0.75~~3.75m/min
5. Installation power: 23.3KW
6. Size: 7920 X 1400 X 2500mm
KV11b Glass Flat Edger & Variable Miter Machine
1. Brief Introduction:
1.1 This glass mitering edging machine is able to process and polish all miter edge, bottom edge and arris on glass at one time. There are 3 wheels for each arris.
1.2. The control system of the glass mitering edging machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor of the machine adopt timing belt which can improve the transmission precision.
1.4. The mitering angle ranges from 0 to 60 degree.
1.5. Different options: Digital display, PLC.
2. Technical Parameters:
1. Processing glass thickness: 3~~28mm
2. Miter angle: 0°~~60°
3. Min size processing glass: 80mm×80mm
4. Processing speed: 0.75~~3.75m/min
5. Installation power: 23.3KW
6. Size: 7920 X 1400 X 2500mm
