Home > Products > Industrial Supplies > Plate Making & Printing Machine

Dog tag embosser

This manually operated dog tag embosser is the essential equipment of dog tag’s post production and processing. Its function is to extrude protruding or receding characters to make dog tag with identifiability and uniqueness. Dog tag embosser is great used for troop, pet shop, Materiel shop fabricates personal identification brand, dog tag's usage.

Feature:

@ Small volume for easy carrying

@ Easy to use,no need training required 

@ Non-slip rubber feet for more steady

@ Heavy duty steel construction for durable using.

@ Card framework for easy locating the position

@ Code character pointer for accurate position

@ 10 Characters per inch and 5 lines of embossing

@ Rubber handle for easy pressing characters on the card

@ Built in regulating port for adjusting the depth of character

@ Code-selection plate for turning and geting the character you want 

@ Adopts ISO international credit card 52 code special characters for more precision & convenience

Dog tag embossing machine is suit for small batch or personalization jobs, such as pet shop, materiel shop fabricates personal identification brand, dog tag's usage.

Specifications:

Capitalization case of English letters (26):   A B C D E F G H I J K L M N O P Q R S T U V W Z 

Capitalization & Lower Arabic numerals (10): 0 1 2 3 4 5 6 7 8 9

Symbols (16):   ＆﹐ .–／﹙﹚~ @ * + ? ! “‵:

Applies workpiece: normative dog tag, 28.6 x 50.8 mm/ 1.13" x 2"

Character-selection: character rosette turnplate

Adopting international credit card special character: ISO

word spacing gap: 0.1 inch

Operation mode: manual

Raised type lines: 5 lines

Raised type location indication: indicator or sample card

Volume(L×D×H): 340×300×180 (mm)

Net weight: 10.8 kg

Use of the Machine
Preparation Work

Insert the handle (5) into the axle hole in the right of the machine, and screw on the fastening screw (6).

Pull the card framework (4) to the outermost, and put in the required card sample as needed.

Will need press printing's dog tag set free enter dog tag tray ( 7) In again be will dog tag tray ( 7) Sets free enter card framework ( 4) Head 's metal card groove in, Lightly go forward impel, Will be dog tag tray ( 7) Unders point set free enter card framework ( 4) Head card groove in. 

Word-selection positioning coding

Turn the code-selection plate (1), and turn the required imprinted character to the character pointer (2).

Gently push and pull the card framework (4) for the up-down position-selection of the card.

For the left-right selection of the card, move right can be finished by directly gently the framework (4); move left, you can gently depress the handle (5) (about at 15 degree), then reset, and the framework (4) can move one space left; after the above operations, the card can be set in the imprinted position.

The card imprinting is taken from left to right, it will automatically move one space left after each character is imprinted; press 3 for the blank.

Imprint the character: to operate the handle (5), push to down, and then reset.

If the imprinted character may be deeper or shallower, undesirable, then it can be adjusted by adjusting screw in the regulating port located in the bottom of the machine.

Regulation means: use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut, and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. Attention: turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters. After finishing, please use the inside-hexagonal spanner with the code sprinter to make the regulating screw stable, and then use the Z outside-hexagonal spanner to fasten the hold-down screw.

Package include:

• 1x Dog Tag Embossing Machine
• 1x Handle
• 1x Handle Fastening Screw
• Some Hardware