Product Description
PDC cutter /PDC(Polycrystalline Diamond Compact)cutter are sintered with selected diamond powder and tungsten carbide under high temperature and ultra-high pressure. They have high hardness, wear(abrasion) resistance and impact resistance, are widely used for oil/gas drilling, geology exploration and mining, applied to soft to medium hard formations. And also could be used be on some grinding tools and wear resistant parts.
Our advantage:
Selected higher quality diamond powder, improved the sintering technique, enhanced the bond combination strength between diamond grain.
Improved the inner structure of the sintered cavity, the pressure and temperature become more balance, which ensure the cutter has more stable performance.
Adopted a new type of carbide, which improved the weld strength.
Optimized the designation of joint face , which reduced the residual stress.
Increased the rate of penetration in highly demanding drilling applications effectively
Application:
Suitable for drilling medium to hard , hard and tough formations.
|
Specification
|
0608
|
0808
|
1004
|
1008
|
1304
|
1308
|
1313
|
1608
|
1613
|
1616
|
1908
|
1913
|
1916
|
1919
|
|
Diameter(mm)
|
6.00
|
8.20
|
10.00
|
10.00
|
13.30
|
13.44
|
13.44
|
16.00
|
16.00
|
16.00
|
19.05
|
19.05
|
19.05
|
19.05
|
|
Height(mm)
|
8.00
|
8.00
|
4.53
|
8.00
|
4.53
|
8.00
|
13.20
|
8.00
|
13.20
|
16.00
|
8.00
|
13.20
|
16.00
|
19.00
|
Product Image
Img 1
Img 2
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
