Home > Products > Toys > Diecast, Toy Vehicles

●Application of ESC:

Model boat ; ship

●Electrical performance parameters of ESC:

Input Voltage: 2-4 LiPo batteries / 5-12 NiMh batteries  

Continuous current output: 30A

40A

BEC output: 5.5V/3A (UBEC), 5.5V/1A-3A (UBEC)

Standard configuration: UBEC 5V/3A

●Shape and weight of ESC:

Dimensions (Length * Width * Height): 54 * 25 * 14

Weight: 40G (with BEC), 38G (OPTO)

Positive and negative power wires: wire size16 #; Material: Copper Silicone Wire; Color: + Red – Black ;Length: 100 (mm)

UVW wire: wire size 16 #; Material: Copper Silicone Wire; Color: U Black V Blue W Red; Length: 80 (mm)

Signal wire: wire size 24 #; Length: 200 (mm); Connector specification: 3pin DuPont terminal 

Model suitable for T head:              

Rubber head Specification: ￠3.5*12 

Thrum heat shrinkable catheter specification: ¢ 4.5 * 20      Color: Red White Black 

Water-cooling heat sink specification: 24 * 30                Color: Rosy

Water-cooling heat dissipation aqueduct: ￠5               Length: 31*m4   Color: Silver

Electric heat shrinkable catheter tone specification: ￠25*60   Color: Transparent

● Parameter settings of ESC:

Battery type and its number settings, the default is automatically set;

There are four options for the throttle control setting; the default is low acceleration, which is suitable for occasions that battery performance is not ideal;

There are four options for the ESC operating mode setting; the default setting is no brake;

There are four options for the ESC power feature, the default setting is positive spin and soft low-voltage protection (commonly known as lower power);

There are four options for the timing setting; the default is 1 ° (for internal rotation motors within 2-4 poles);

There are two options (8 KHz, 16 KHz) for the PWM operating frequency setting, the default is 8 KHz.

● Standard configuration:  

Power line length: 100 (mm)     UVW line length: 80 (mm), no rubber head or T head   UBEC 5V/3A

● Main features: