Product Description
Construction of street lights, various components of performance of the technical parameters:
First, the poles:
1, Shanghai Bao Steel pole material selection of quality low carbon steel Q235A type silicon content of steel is not higher than 0.04%, after a large press brake bending shape, straightness error is less than 0.05%, the poles of the wind resistance at 36.9 m / s over 11 design, anti-seismic intensity of 8.
2, Rod Height x m, the diameter of xmm, under caliber xmm, wall thickness xmm. Pole with the bottom flange, the flange installation pitch as Øx, through the anchor bolts installed in the foundation. (X for the user to set the parameters, or by the company according to conventional configuration)
3, the pole for the automatic submerged arc welding, welding, reliable, smooth surface, no obvious holes, welding tumor, welding defects such as undercut, ultrasonic testing, welding GBl1345 Ⅱ level of standards.
4, dealing with internal and external anti-corrosion steel hot-dip galvanizing, galvanized process pickling, galvanizing, washing, phosphating and passivation processes, zinc coating a smooth surface appearance, gloss consistent, wrinkle-free skin, flow fall and zinc tumor from the skin, spots, surface defects such as yin and yang existence of zinc coating thickness of 86um or more, in line with national standards GB/T13912-92, zinc coating adhesion consistent with the requirements of GB2694-88, anti-corrosion life of more than 30 years.
5, pole electrostatic spray after hot-dip galvanizing (color optional), spray, scrub before to increase the adhesion, spray the process of curing time and temperature strictly controlled to ensure the plastic layer of uniform, smooth, nonporous. Spray thickness ≥ 1Ooum, adhesion to GB9286-880 level, smooth surface, hardness ≥ 2H.
Second, the lamps:
1, lamp, lamp cover aluminum die-casting, surface treatment by electrostatic spray, light and corrosion resistant structure. Corrosion resistance shell lamps grade Ⅱ; protection grade IP65; electric shock level of class Ⅰ. Meet the "safety requirements and test fixtures" (GB7000.1-7000.6) requirements.
2, high-purity aluminum reflector is extruded anodized electrochemical polishing treatment, with the optical properties of stable, high reflectivity characteristics.
3, high-intensity surface through the mask with tempered glass, high temperature above 200 ℃, high transparency, impact resistance.
4, reflector, tempered glass cover and the holder into one sealed adhesive to form bubbles within the changing structure, with good sealing performance, more than 250 ℃ high temperature seals, sealing up to IP66.
Third, the light source:
By the United States CREE, Puri, Taiwan wafer and high-power LED light lights macro and other quality beads or modules, with Taiwan Ming Wei and other quality power supply. (Or the user to choose other brands)
Fourth, other technical parameters:
1, the pole height: ± 5%
2, the high beam lever arm (L): ± 1%
3, rated voltage: 220V (effective mass)
4, rated insulation voltage: 500V (effective mass)
5, Rated frequency: 5OHz
6, insulation resistance: ≥ 5OOMQ
7, dielectric strength: to withstand the exchange 5Ohz, 15OV (effective mass), experimental voltage lasted lmin No breakdown or flashover
8, the power factor: cns ∮ ≥ 0.85
9, light electric shock protection class: Ⅰ class
10, the connection mode: single-phase
11, lighting efficiency: ≥ 75%
12, protection class: IP65
13, reflector materials, high purity aluminum :3002-0
14, lampshade material: high transparent glass surface resistant to
15 candela distribution: the distribution curve airfoil
16, all the electrical lamps (LED lamp beads, modules, aluminum plate, heat sink and current source) are installed in the fixture
Fifth, test:
Pole test: quality control manual, inspection, test specifications and the corresponding national standard and process technology file.
Lighting test: GB3037-91 and the corresponding national standard and process technology file.
VI Package:
Street pole weaving with packaging, packing light packing.
-------------------------------------------------- ------------------------------
Special note:
1, the basic requirements of embedded basis having factory production; open the electric door special wrench required; installation must ensure that the lamp body safety ground.
2, I can provide any image and parameters, processing of various road lights.
| Payment Terms: | Telegraphic transfer |
| |
