Product Description
SS Tester (Special) Type: SHZSS-2Z
I. Product Overview
SHZSS-2Z suspension tester for sewage, environmental protection, steel, recycling water, chemical and other industries to test the water, suspended solids, suspended solids in order to control the water reach the required water quality standards.
Second, the principle:
The micro photonics instrumentation colorimetric detection principle to replace the traditional visual colorimetry. Eliminates human error, so greatly increased measurement resolution. Measurement, when measured in water samples into the photoelectric colorimeter seat, press the reading key, meter readings directly.
Technical parameters
Range 0-100 PPM
Resolution 0.01
≤ 2% repeatability
Indication error ± 5% FS ± 1 word
Power Supply AC 220V 50Hz
Three characteristics:
1. Microcomputer, touch keyboard easy to use.
2. Can be automatic zero and 1 ~ 5-point auto-calibration.
3. This instrument uses a unique semiconductor light emitting device (patent number), and its life than the incandescent light (about 350 hours) several orders of magnitude higher, about tens of thousands of hours.
4. High resolution. Instrument resolution of 0.01PPM.
IV, Operation Guide
1. Use
Turn the power switch, the water poured into the glass-like groove, with the strong soft absorbent cloth or paper dry glass-like groove of water damage (not direct contact with the finger-like groove surface of the glass to avoid fingerprints left on the surface of glass-like groove, influence the results), into the kind of groove seat, covered with kind of slot cover, press the reading key, wait a few seconds, the figures show that suspended solids value.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
