Home > Products > Consumer Electronics & Lighting > Lighting > Professional Lighting

1. Patent design, combining with many LED flood light high technic in these products.
2. Highpressure diecasting aluminum material used for main part,which is resistible to wallop and corrosion
3. Ultra-high heat conduction aluminium material used for main part,special treatment processing.
4. High efficient and reasonable photometric technologies,using various of methods for the light distribution
5. High strength toughened glass, using special treatment with better ultraviolet resistance.
6. Humanized structural design, lighting installation and easier maintenance.
  Installation angle can be adjusted between -45º and 75º,which is suitable to various installation methods.
  External wiring block, patent owned,makes wire connection outside of the wiring space.Convenient to operate and anhance the light IP.
7. Use single powerful LED (30W-120W) as the light source, with our own intellectual property rights for LED encapsulation. Utilize the special design of multichip single module. Choose the imported high brightness semiconductor chips. With the characters of high heat conductivity, low luminous decay, pure light color and no ghosting.
8. The LED is closely connected to the crust. The heat from LED will be removed from the heatdissipation wing and also by the air cross-ventilation. It can ensure its life-span effectively.
9. The lights were sealed by silicone rubber, it makes the heat sink, end cap and the glass combined perfectly with each other The surfaces were passed the treatment like anodic oxidation and plastic spraying. It can meet the requirement of IP65.
10.Use the high pure imported aluminum from Germany as the reflector This kind of reflector has high reflecting efficiency, and it can make sure the luminous flux. The special design of our reflector can improve the light uniformity and utilization ratio. It can control the light inside of a useful area. The advantage of the LED streetlights like power saving can be revealed adequately.
11.No delay start; No waiting. It can reach its normal light as soon as it is turned on. The switch can be used for hundreds of thousand times.
12.It is safe and removable, and it can be positioned at any angle. It is universal, and it can be used in a large scale.
13.Environment friendly and no air pollution. We exert the design of using cold light source. It’s no heat radiation. There is no ill to our eyes and skin. The floodlights do not have lead, hydrargyrum and any other contamination. It is a real environment friendly and saving power product.
14.It's an excellent partner of the solar panel system. It can exert many such as working with direct current and lower voltage. It is power saving and environment friendly. The connection of the solar panel and LED light source provide a high reliability.

 

Features:
1. Work voltage:AC(85-265V)/50-60HZ
2. LED Power:1*20W
3. Power factor (PF):>0.95
4. LED efficiency:90-100lm/W
5. LuLumens:1800-2000Lm
6. Fixture efficiency:>95%
7. LED Life:>50000Hrs
8. Base: 2PINS
9. Rated Voltage: 100-240VAC, 50/60Hz
10.Color Temperature: WW(2700~3800K), NW(4000-5000K) or CW(5500-6700K)
11.Beam Angle: 150°
12.CE ,ROHS approved
13.Body Temperature: <70 ℃ @Ta=25 ℃
14.Recommended Replaced bulb： Metal Halide Lamp
15.12-24VDC for solar power system is available
18.IP Rating:IP65

 

Application:
Mainly used for outdoor flood lighting,architecture of decorated lighting,industrial lighting,health training center and stadium,park dock etc.