Product Description
A Product Name: SH river water pump in a pump power
Second, an overview of: S (SH)-type pumps are designed to national standards, the series, standardized, high level of generalization, the pump performance, advanced, stable, safe and reliable, in the design of new structures, new materials, can be for a variety of media delivery.
Third, the performance characteristics: 1, S-type pump for conveying water or similar physical and chemical properties of liquid water; 2, S (SH)-type pumps, widely used in urban water supply and drainage, power plants, industrial process water system, pressurized, agricultural irrigation and various water projects, petrochemical projects.
Fourth, the performance range: flow 50 ~ 15000m3 / h Head; 8.6 ~ 140m temperature ≤ 80 ℃, Voltage 380V ~ 10000V (also available performance parameters according to user requirements);
According to customer requirements using different materials.
Pump Rotation: looking from the motor, pump clockwise (according to user requirements)
V. Pump Model significance: patients with 500S (SH) 35A
500 - pump suction diameter (mm)
S-single-stage double-suction, centrifugal water pump in the open
35 - design point head (m).
A-impeller first cut.
Sixth, the structure description:
1, S-type pump inlet and outlet are the pump below the axis line, and the vertical axis into the horizontal direction. When the water without removing the import and export inspection and motor. Looked from the direction of transmission, the pump is clockwise (according to user needs also to rotate counter-clockwise).
2, the main parts are the pump; pump, pump cover, impeller, shaft, double suction seal rings, bushings, etc. In addition to materials of high quality carbon steel shaft, the other main parts made of cast iron, cast steel, stainless steel.
3, pump impeller and pump cover composition studio, in and out of the flange, install the vacuum gauge and pressure gauge with tube holes. The lower flange out of the water, turn on the water pipe with threaded holes.
4, the impeller through the static balance test, and both sides of the sleeve with the sleeve nut on the shaft, the axial position can be adjusted through the sleeve nut. Impeller blade axial force to use its symmetrical arrangement, both sides of the water balance.
5, pump bearings to ball bearings. Bearings mounted in the bearing body, installed in the pump ends, with Huangyou Run slide.
6, double suction pump seal ring to reduce the water pressure chamber water drain back to the room.
7, pump directly through a flexible coupling from the motor drive, drive internal combustion engine can also be used when necessary.
8, for soft packing seal (seal if necessary can also be installed). In order to prevent air entering the pump seal lubrication and cooling chamber, mounted between the packing rings in the packing, work a small amount of high-pressure water pump, pump cover in the open through the surface of the trapezoidal groove into the filling chamber, water seal from the role.
Guangzhou water pump, water pump Co., Ltd, Guangzhou, Guangzhou, Guangzhou Yangcheng Industrial Co., Ltd., Guangzhou Yangcheng Co., Ltd., Guangzhou Pump Co., Ltd..
In the open pump high flow pump to find Yangcheng
| Lead Time: | 1-15 days |
| Head: | 78 m |
| Flow: | 160 m3/h |
| Power: | 55 Kw |
| |
