| Model: | ZY-C |
|---|---|
| Brand: | Zhong Yi |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Analysis Instrument |
| Label: | pipeline crawler , x ray pipeline crawl , x ray generator |
| Price: |
US $30000
/ pc
|
| Min. Order: | 1 pc |
| Last Online:11 Feb, 2015 |
1 Ease start, Low-state positioning. To ensure accurate positioning at the same time, extend equipment life.
2 Features with going through the welding machine, without impacting of the welding machine, good for normal work .
3 X-ray Generator system has a regulatory function of KV, Transillumination to ensure the X-ray film and degree of consensus.
4Electronic speed control motor function, to achieve constant torque, constant current operation, could be 40 percent energy saving at the same time motor overcurrent protection.
5 Video surveillance can carry-on with monitor positioning function,; special occasions with video can increase location accuracy (a slope section), reduce scrap rate, that of filming location accuracy of 100%.
6Automatically inspect the energy of battery. When the voltage of battery is not enough, the crawler will turn back in time .
7It has various real-time function to protect the x-ray generator in case of meeting water, over-voltage, zero voltage, over-current, zero current, meeting barrier, antenna falling off, X-ray generator falling off, over temperature.℃
Main Technical specifications
|
Model |
ZY-2 |
ZY-3 |
ZY-4 |
ZY-2C |
|
Limit of applicable pipe-diameter(mm) |
Φ406-1200 |
Φ323-529 |
Φ219-355 |
Φ508-1400 |
|
Outline dimension of creeping instrument (mm) |
1410×300×195 |
1531×210×195 |
1230×180×195 |
1150×300×260 |
|
Dimension of instruction controller (mm) |
420×360×160 |
420×360×160 |
420×360×160 |
210×87×170 |
|
Weight (Kg) |
80(100) |
60 |
50 |
100 |
|
Creeping Speed (m/min) |
12-15 |
12-15 |
12-15 |
13-16 |
|
Location error (mm) |
±3 |
±3 |
±3 |
±5 |
|
Maxima climbing slope |
0°-25° |
0°-25° |
0°-25° |
0°-25° |
|
Ray radiation angle |
360°×25° |
360°×25° |
360°×25° |
360°×25° |
|
Operate temperature |
-20℃-60℃ |
-20℃-60℃ |
-20℃-60℃ |
-20℃-60℃ |
|
Relative humidity |
90% |
90% |
90% |
90% |
Configuration
|
No. |
Item |
Quantity |
|
1 |
Climb car |
1 |
|
2 |
X-ray Generator system |
1 |
|
3 |
Command controller |
1 |
|
4 |
Battery and cell box |
1 |
|
5 |
Changer |
1(120V) |
|
6 |
Supporting plate |
2 |
|
7 |
CCD camera |
1 |
|
8 |
lifter slide |
2 |
|
9 |
connecting cable |
2 |
|
10 |
Short sleeves |
adapting |
|
11 |
Extension Shaft |
adapting |