Home > Products > Industrial Supplies > Machinery > Cleaning Machine

Suitable for hardware degreasing, stamping parts degreasing, copper sheet degreasing, spring degreasing, aluminum degreasing, cutting oil cleaning, bearing degreasing cleaning, gear degreasing, auto parts degreasing, screws degreasing, magnetic core degreasing , Plating degreasing, etc...

technical parameter:
Model: DYS-1030
Ultrasonic frequency: 40KHZ, 28KHZ
Ultrasonic power: 1500W
Adjustable time: 0-30min
Power supply voltage: single-phase 220VAC±10% 50HZ
Electric heating power: 4KW
Adjustable temperature: normal temperature－110℃
Inner groove size (mm) length (L) × width (W) × height (H): 600 × 500 × 400
Dimensions (mm) Length (L) × Width (W) × Height (H): 720 × 640 × 695
It can effectively remove the rosin and stains on the surface of the inductor coil when combined with a specific lotion.
The ultrasonic cleaning machine produced by Shenzhen Dongyuan Ultrasonic Equipment Co., Ltd. can effectively remove the residual rosin and flux in the production process of the inductor to prevent the flux from corroding the inductor coil. The use of a coil cleaning machine saves time and effort, and eliminates the production process with low manual cleaning efficiency and waste of manpower. Ultrasonic cleaning is comprehensive, once in place, can effectively clean the blind corners,

Main performance and characteristics:
1. The overall stainless steel structure of the machine is beautiful and durable, simple and convenient to operate, and can be used after pl ing in the power supply.
2. The machine adopts 28KHZ and 40KHz ultrasonic waves to effectively reduce noise and improve cleaning efficiency.
3. The cleaning time can be adjusted freely within 60 minutes (in seconds) to reach the cleaning standard.
4. The machine is equipped with an independent drainage ball valve for manual drainage.
5. Electric box features: The new dual-frequency circuit has the following functions: infinitely adjustable power, dual-frequency sweep frequency tracking, digital display frequency display, digital display power display, digital display current display and digital display timing cleaning. (According to the cleaning of different workpieces, to achieve a standard and uniform cleaning effect)
6. Heating function: equipped with a constant temperature mechanical thermostat, which automatically stops heating after reaching the design temperature, and automatically heats when it is lower than the set temperature (heating power: 1-3KW optional)

Application range:
Electroplating products, stainless steel products, brass products, aluminum products
Automobile and motorcycle parts, metal stamping parts, electronic and electrical parts, oil pump nozzles, compressor parts, semiconductor silicon wafers, electroplating industry pre-treatment and chemical fiber industry spinneret and filter core cleaning.