| Model: | 3200 |
|---|---|
| Brand: | OUKE |
| Origin: | Made In Germany |
| Category: | Chemicals / Adhesives & Sealants |
| Label: | solvent resistance , Acid resistance , alkali resistance |
| Price: |
¥300
/ pc
|
| Min. Order: | 20 pc |
| Last Online:15 Jan, 2015 |
OUKE 3200 Series Corrosion-resistant Adhesives
PRODUCTS INTRODUCTION
OUKE 3200 Series is a two-parts room temperature curing or heat curing silicon adhesives. It does this by Part A and Part B cross-linking reaction caused by release of low molecular weight, and ultimately curing into a high-performance elastomers. Cured elastomer has excellent electrical properties, solvent resistance, aging resistance, high temperature, insulation, no swelling, and for most metals and non-metallic material with good adhesion, to a variety of electronic components and electrical products from the sealing adhesive effect on the surrounding environment will not produce pollution.
TECHNICAL PARAMETERS
TYPE | Corrosion-resistant Adhesives | ||
MODEL | 3215 | 3220 | 3230 |
COLORS | Transparent, white, black | Transparent, white, black | Transparent, white, black |
VISCOSITY（mPa.S 25。C） | 4000-5000 | 4500-5500 | 5000-6000 |
DENSITY（g/ml） | 1.2-1.6 | 1.2-1.6 | 1.3-1.7 |
MIXING RATIO | 1：1 | 1：1 | 1：1 |
WORK TIME（25。C,min） | 30-60 | 30-60 | 30-60 |
FULL CURE TIME（h,25。C） | 24 | 24 | 24 |
PHYSICAL PROPERTIES AFTER CURING | |||
HARDNESS（shoreA） | 8-40 | 8-40 | 8-40 |
TENSILE STRENGTH（MPa） | 1.5-2.0 | 1.5-2.0 | 1.5-2.0 |
ELONGATION % | 70 | 70 | 70 |
VOLUME SWELLING RATIO（%，120# Gasoline 5025。C×7d） | 130 | 120 | 115 |
–60-200 | –60-200 | –60-200 | |
ELECTRICAL CHARACTERISTICS AFTER CURING | |||
DIELECTRIC STRENGTH（KV/mm） | 20 | 20 | 20 |
VOLUME RESISTIVITY（Ω•cm） | 2.0×1015 | 2.0×1015 | 2.0×1015 |
DIELECTRIC CONSTANT（60Hz） | 3.0 | 2.9 | 2.9 |
USAGE
Suitable for most metal and nonmetal materials, elastic bonding, Especially suitable for bonding the working environment that need solvent resistance, oil resistance, acid resistance, alkali resistance with special requirements. A variety of instruments or equipment bonding can also play a waterproof, moisture-proof effect.
THE USE OF METHODS
Must first be sticky surface for the appropriate pretreatment, Remove the corrosion, stains, oil, etc., what maybe affect the bonding or sealing. Then press the relevant mixing ratio, According to the need for different thickness of the coating.
NOTES：
1、Initial curing is generally 30-60 minutes, Completely cured after 24 hours, Do not prior to the force before fully cured.
2、Application and curing process should be kept well ventilated.
3、Uncured adhesive to avoid skin and eye contact.
4、Mixture of glue should be fully used, can not be mixed with other glue.
5、Note sealed to prevent rain and moisture deterioration.
6、Stored in a cool below 27 ℃, storage period of 6 months.
