Home > Products > Industrial Supplies > Other Industrial Supplies

Weitec ICS-17 electronic belt scale, dynamic cumulative error ≤±0.25%, suitable for industrial enterprises weighing process control, such as the detection of production volume, control of quantitative loading of products and detection of inventory and other occasions, to provide important data information for plant automation control and modern management. System composition: Weitec ICS-17 electronic belt scale is mainly composed of four parts: Weitec ICS-17 weighing bridge (optional idler), S weighing sensor, W62C-CS (original 60-12 C) speed measuring sensor and speed measuring drum, WTC3001 type integrator. Power :220 VAC ,50HZ Power :50 W Weighing bridge: ICS-17 type weighing bridge is equipped with four sets of supporting sticks on the double lever, which is supported by two pull-type sensors in the middle, and the outer support is supported by the non-grinding ear shaft fulcrum. To overcome the influence of bias load on precision effectively, this kind of sealing device can prevent shockproof, moisture-proof, anticorrosion and material accumulation, so the problems caused by using knife edge device and bearing device do not occur in bad environment. The main beam of the weighing device adopts rectangular steel pipe, which makes the whole weighing bridge frame have enough rigidity, small weight, and the surface ash deposit area reaches the minimum. In order to ensure the stability of the whole system, the high precision resistive strain gauge sensor is installed in the tensile position to reduce the nonlinear error. Speed sensor: The standard configuration of the ICS-14,ICS-17,ICS-20,ICS-30 series of electronic belt scales of Witeck Company adopts W62C-CS (formerly 60-12 C) speed measuring sensor, which can be directly installed on the tail drum, speed measuring drum or speed measuring roller, and the speed measuring roller / roller is installed on the double surface of the return belt, which eliminates the impact of belt slip. The speed measuring sensor is a digital carbonless pulse generator. When the belt is running, the speed measuring sensor sends out a series of speed pulses, each pulse representing a unit length of the belt stroke, pulse frequency and belt speed proportional. The shell material of speed measuring sensor is cast aluminum, which can be used in open air working environment. ac pulse generator does not need to adjust or replace the charcoal brush. Weighing sensor: Weitec ICS-14,ICS-17,ICS-20 series electronic belt weigher all use W9KS( original 9363) type pull type electronic strain type weighing sensor.