| Model: | PT123,PT124 |
|---|---|
| Brand: | SAND |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Analysis Instrument |
| Label: | pressure transducer , pressure sensor , melt transducer |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:26 Sep, 2024 |
High Temperature Melt Pressure Transducer (Melt Pressure Sensor)
Product Introduction:
SAND PT4XX6 series pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400 . This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and deb ing. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures.
Performance Parameters
|
Pressure Range |
0~50 to 2000bar(0~750 to 0~30000psi) |
|
Pressure Units |
PSI, Bar, Mpa or Kg/cm2 |
|
Accuracy |
±0.5% FS |
|
Repeatability |
±0.2% FS |
|
Input excitation |
10VDC ( 6 ~ 12 V DC ) |
|
Output Signal |
3.33mV/V (Default), 3.0mV/V(Optional) etc. |
|
Maximum diaphragm temperature |
662 F (350 ) for rigid stem
|
|
Zero shift due to temperature change |
≤0.15 MPa/100°C |
|
Insulation Resistance |
≥500MΩ/500VDC |
|
Maximum Overload Pressure Rating |
1.5 x FSO |
|
Process connection |
1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. |
|
Electrical Connection |
6PIN or 8PIN |
|
Internal Shunt Calibration |
80% FSO |
|
Measurement principle |
4-arm bonded foil strain gage Wheatstone bridge |
|
Temperature Sensor (optional) |
E,J,K,S type or Pt100 |
Features:
| Payment Terms: | TT,Paypal,Western union |
|---|---|
