| Characteristics of 3D Wheel Alignment |
| 3D cameras alignment—Based on the car and not influenced by the platform |
| Measurement system—equipped with double digital cameras and four target disk, |
| supplying revolutionary measurement mode |
| Target disk—There is no electronic components, so the wheel alignment will not has a |
| component failure problem. |
| Equipment Calibration - once calibration before delivery, workable immediately after |
| installation, no need for periodic calibration |
| Measurement progress—no need to compensate for steel ring , the precise eccentric |
| compensation will be just once pulling or pushing the car back and forth |
| Software system——Easy to operate, complete conventional basic parameters within two |
| minutes ,significantly faster than conventional aligners |
| Daily Maintenance—Easily maintenance , download and upgrade freely for the model |
| data |
|
|
| Optional Variable-Height camera support controls |
| Optional Drive-on camera aid |
| 3D Animation |
| Universal wheel clamps |
| Model |
SH-G8 |
| Feature |
| Standard Configuration |
| Compact cabinet, Dell computer, canon printer,target plate, Pylon bracket, Brake fixer, |
| Steering wheel fixer, Wedge block, Turntable, Transition block of turntable ,dedicated |
| target disk ,wheel rim adapter |
|
|
| Software function |
| Basic function |
| camber, caster, Kingpin Inclination, toe angle, set back, Thrust Angle |
| Extended function: axis deviation measurement, wheel deviation measurement, |
| Animation, single-wheel measurement, the vehicle lift measurement function, |
| straight steering wheel function, Alignment platform levelness detecting function, engine |
| bracket adjustment, Locking toe measurement function, Toe curvature measurement, Ride |
| height measurement function, Air suspension vehicle alignment software(proprietary |
| software), Rolling Radius Measurement, Scrub Radius Measurement, wheel base |
| measurement, axle base measurement |
|
| |
|
|
| |
|
|
| Technical Specification |
| Measurement project |
Accuracy |
Measurement range |
| Display accuracy |
1´/1mm |
|
| Camber |
±2´ |
±10° |
| Caster |
±6´ |
±20° |
| Kingpin Inclination |
±6´ |
±20° |
| Toe-in & Toe-out |
±2´ |
±20° |
| Set back |
±2´ |
±5° |
| Thrust angle |
±2´ |
±5° |
| Wheel Deviation |
±2mm |
|
| Axis Deviation |
±2mm |
|
| Measurement project |
Accuracy |
Measurement range |
