Home > Products > Construction & Decoration > Waterproof Materials

DESCRIPTION

TYL®-Waterguard PVC are extruded from a high-grade polyvinylchloride (PVC) compound which has been formulated to give excellent flexible and durability. They used in concrete for the salivary the construction and expansion joints, are embedded in concrete, across and along the joint, to form a continuous water-light diaphragm that prevents the passage of fluid through the joint. They are available as straight lengths and factory produced intersections or as a factory prefabricated segment of a network to minimize site jointing.

Uses

1. Water Retaining Structures

2. Reservoirs, Water Towers, Dams

3. Spillways, Canals, Swimming Pools, Sewage Tanks

4. Basements and Underground Car Parks

5. Tunnels and Subways Retaining Walls

6. Foundation Structures

Advantages

1. Easy to install on site.

2. Easy to weld on site.

3. Full range of moulded and fabricated intersection pieces.

4. Suitable for use in potable water structures.

5. Flexible to accommodate movement during construction and service life.

6. High quality PVC for long durability.

7. Many different types and sizes available.

8. Fully continuous 4 bulb network.

9. Reinforced eyeleted edge flanges for positive fixing.

Specification Compliance

CEDD GS 16.80 and Table 16.12

Profiles

Type: Polyvinyl Chloride

Color: Blue

Width: 150mm, 200mm, 250mm, 330mm

Thickness: 4mm

Packing: 15m pre roll

Water Pressure Head: At Least 55mm for 250mm width model

Joint Movement: Up to 10mm

Physical & Mechanical Properties

Density: 1344 kg/m2

Hardness: 72.2 IRHD or 5.36 N/mm2

Shore D Hardness: 39.1

Shore A Hardness: 90

Tensile Strength: 14.3 N/mm2

Elongation at Break Point: 358%

Water Absorption: 0.08%

Softness number: 48