Three holes power surge protection socket
Product Description
1)Product description:
This product is suitable for lightning protection zone: lightning surge protection of LPZ2 area at the junction with the LPZ3 (D level) power lines.
◆ It has six international standard jack socket and is designed as modular , is easy to install;
◆The material of its shell use imported fire-retardant materials,its set of components plug bush is phosphor bronze , the products meet international standards and national standards.
◆With advantage of low residual voltage, fast response and long life, built-in overcurrent, overload protection.
◆It can be inserted 16 kinds of different plugs, full use of every outlet.
◆It is mainly applied to the lightning protection (overvoltage) protection of low-voltage single-phase AC power supply (220V AC)system electrical and electronic equipment.Such as telecommunications equipment, computer and network equipment, medical instruments, precision electronic equipment, household appliances and so on.
2)Technology parameters:
TYPE: |
KLF-A3-01 |
Protection Class: |
D |
Rated voltage Un(V) |
220V |
Nominal Discharge Current (8/20μ s) (In): |
10KA(8/20μs) |
Max. Discharge Current (8/20μ s) (Imax. ): |
20KA(8/20μs) |
Voltage Protection Level Up(KV): |
≤1.0KV(20KV 8/20μs) |
Max. Continuous Operating Voltage (Uc): |
320V |
Voltage Protection Level( Up):(V) |
≤700V |
Response Time:(ns) |
<20ns |
Leakage current(μA): |
≤20μA |
Maximum load current(A) |
10A |
Protection Mode: |
L-PE、N-PE |
Interface Model: |
Three holes trinom |
Working Environment: |
Temperature:-40°C+80°C;Relative humidity:<95%; |
Power source jumper length |
2.4 meter |
Dimension(mm): |
220×66×34mm |
Weight(kg): |
0.539 |
Order coding: |
DDC001 |
3)Product installation:
1.This SPD is applied to the lightning protection of 220V power distribution system for the fourth-class ,it is used in the front of equipment,and its usage is the same as general extention wire.
2.Apply to the lightning protection of 220V AC electrical equipment, such as: computer centers, control rooms, information equipment, office electrical equipment, household electrical equipment, high precision equipment .
3.It is suitable for indoor operation.
4. All wirings must be solid and connect by electric .
5.Lightningproof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible,resistance should be less than 10Ω.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,