· 低能耗 < 1W/单位
· 继电器开关输出每次达到300W
· `温度控制适用于2管制系统
· 温度范围达到 –40°C到o 70°C (-40°F 到 158°F).
· 可自动控制三极风扇
· 拥有节能功能以及定点限制功能从而达到节减成本性能
· 可控制单极加热,制冷和风扇操作模式
· Password protected programmable user and control parameters
o Setpoint range limitation
o Access control for setpoints, fan speeds and mode change
o Access control for heat/cool change and time programs
o Select your display contents
o Selectable behavior after return from power failure
· Temperature display in Celsius or Fahrenheit
Deluxe Version:
· Clock and time schedule functions
· Blue backlight for LCD
· Infrared remote controller option:
With special features for Boost and delayed switching on or off
Applications
· Air Only Systems: Three stage fans for single duct systems with up to one binary output for auxiliary heating and cooling devices.
· Air/Water Systems: Induction units, fan coil units for 2-pipe systems with one binary output for a spring return valve.
General Description
The TLC-FCR is a stand-alone electronic fan coil controller with one control loop. The TLC-FCR features 1 internal NTC temperature sensor and four binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TLC-FCR can be configured using the standard operation terminal. No special tools or software is required.
Ordering
Item Name
|
Item code
|
Variant
|
Features
|
TLC-FCR
TLC-FCR-W01
|
40-10 0009
40-10 0009-01
|
Standard
Cooling only
|
Fan coil controller with:
1 TI int
3 DO (Relay) Fan control
1 DO (Relay) Binary valve control
|
TLC-FCR-D
TLC-FCR-D-W01
|
40-10 0010
40-10 0010-01
|
Deluxe
Cooling only
|
Selection of actuators and fans
Binary auxiliary devices: E.g. fans, on/off valves, etc. Do not directly connect devices that exceed 2(1.2)A. Observe startup current on inductive loads! Do not connect more than one fan coil unit to one controller.