供应新一代共聚聚酯材料-TRITAN™的详细描述：
    建议物料: PCTG (TX1001) 主要特性: 清澈透明 优良的抗冲击性 高耐化学性 优良的可注塑性 耐高温性 良好的二次加工性 强抗刮花性 符合美国FDA和其它相关认证 安全、环保,不含双酚A 伊士曼 新一代共聚聚酯 Tritan™ 详细介绍: 由于人们对生活品质和健康的追求,市场对塑胶原材料的环保要求亦日益提高,例如 PC 水解后会产生 BPA (双酚-A)。近年来研究表明,人类(包括动物)如长期摄入微量的 BPA,极有可能对生殖系统产生不良影响,破坏性别比例的平衡,因此部分国家和地区已限制或禁用 PC。制造商面对环保方面的压力,正在寻找能替代 PC 的材料,Eastman 正是在这种市场背景下,开发出新一代共聚聚酯 Tritan™。 塑胶产品制造商也许对 Eastman 传统共聚聚酯并不陌生,例如 Eastar、Provista 等,它们固然有许多优点,也不含 BPA,但是Tg不高 (85℃左右),不能完全满足耐温高的要求,因此不能完全取代 PC。Eastman 新一代共聚聚酯 Tritan™ 不但完全继承了传统共聚聚酯的优点,而且耐温更高,加工更容易。 Tritan™的优点: 1). 不含BPA Tritan™ 在聚合生产过程中无 BPA 成分,在使用过程中也不会释放 BPA,符合环保要求及 FDA。 2). 清澈透明 透光率>90%,雾度

PCTG有PC的冲击强度，PMMA的透明度，不含双酚A。可用于婴儿奶瓶，耐开水蒸煮。
Eastman TritanTX1001 is an amorphous copolyester with excellent appearance and clarity.
EastmanTritanTX1001 contains a mold release derived from vegetable based sources. Its most
outstanding featuresare excellent toughness, hydrolytic stability, and heat and chemical
resistance. This new-generation copolyester can also be molded into various applications without
incorporating high levels of residual stress. Combined with Tritancopolyester’s outstanding
chemical resistance and hydrolytic stability, these features give molded products enhanced
durability in the dishwasher environment, which can expose products to high heat, humidity and
aggressive cleaning detergents.TritanTX1001 copolyester may be used in repeated use food
contact articles under United States Food and Drug Administration (FDA) regulations.Tritan
TX1001 copolyester is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Typical Properties (Preliminary)
Specific Gravity D 792 1.18
Mold Shrinkage D 955 0.005-0.007mm/mm
(0.005-0.007in./in.)
Tensile Stress @ Yield D 638 43MPa (6200psi)
Tensile Stress @ Break D 638 53MPa (7700psi)
Elongation @ Yield D 638 6%
Elongation @ Break D 638 210%
Tensile Modulus D 638 1550MPa (2.25)
Flexural Modulus D 790 1550MPa (2.25)
Flexural Yield Strength D 790 62MPa (9000psi)
Rockwell Hardness, R Scale D 785 112
Izod Impact Strength, Notched @ 23°C (73°F)D 256 980J/m (18.4ft·lbf/in.)
Impact Strength, Unnotched @ 23°C (73°F) D 4812 NB
Deflection Temperature
@ 0.455 MPa (66 psi) D 648 99°C (210°F)
@ 1.82 MPa (264 psi) D 648 85°C (185°F)
Total Transmittance D 1003 90%
Haze D 1003 <1%
Drying Temperature 88°C (190°F)
Drying Time 4-6hrs
Processing Melt Temperature 260-282°C (500-540°F)
Mold Temperature 38-66°C (100-150°F)
Comments
Properties reported here are based on limited testing. Eastman makes no representation
thatthe material in any particular shipment will conform exactly to the values given.
21-Jan-2008 8:15:20 AM