型号: | S-12V-12 |
---|---|
品牌: | TC |
原产地: | 中国 |
类别: | 电子、电力 / 电源和配电设备 / 开关电源 |
标签︰ | 开关电源 , 工业电源 , 电源适配器 |
单价: |
¥18
/ 件
|
最少订量: | 100 件 |
功能
Function declaration |
S-10-12 | S-120-12 | S-250-12 | S-350-12 | S-350-15 | S-350-24 | S-350-36 | S-350-48 |
直流输出电压
DC output voltage |
12V | 12V | 12V | 12V | 15V | 24V | 36V | 48V |
输出电压容差②
Output voltage tolerance② |
±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
额定输出电流
Rated output current |
1A | 10A | 20A | 30A | 23.2A | 14.6A | 10A | 7.3A |
输出电流范围
Output current range |
0-1A | 0-10A | 0-20A | 0-30A | 0-23.2A | 0-14.6A | 0-10A | 0-7.3A |
纹波及噪音③
Ripple noise③ |
150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p |
进线稳定度④
Incoming line stability④ |
±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
负载稳定度⑤
Load stability⑤ |
±1% | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
直流输出率
DC output rate |
12W | 120W | 240W | 360W | 348W | 350.4W | 360W | 350.4W |
效率
Efficiency |
74% | 74% | 74% | 79% | 78% | 81% | 82% | 83% |
直流电压可调范围
DC voltage adjustable range |
10-13.2V | 10-13.2V | 10-13.2V | 12-15V | 13.5-18V | 20-26.4V | 29-41V | 41-56V |
输入电压范围
Input voltage range |
90~132VAC/180~264VAC 由开关选择(Selected by the switch) 47~63Hz; 255~370VDC
90~132VAC/180~264VAC (Selected by the switch) 47~63Hz; 255~370VDC |
|||||||
输入电流
Input current |
6.5A/115V 4A/230V | |||||||
冲击电流
Impulse current |
25A/115V 50A/230V | |||||||
漏电流
Leakage current |
<3.5mA/240VAC | |||||||
过载保护
Overload protection |
105-145%类型:切断输出;复位:交流重新启动
105-145% type: cut off the output: AC reboot reset; |
|||||||
过电压保护
Over voltage protection |
13.8-16.2V | 13.8-16.2V | 13.8-16.2V | 13.8-16.2V | 18-21V | 27.6-32.4V | 42.8-46.2V | 57.6-67.2V |
高温保护
High temperature protection |
RTH3≥50℃风扇启动≤55℃风扇关闭≥80℃切断输出(5-15V)
RTH3 ≥ 50 ℃ fan starting ≤ 55 ℃ fan off ≥ 80 ℃ cut off the output (5-15V) |
|||||||
RTH3≥60℃风扇启动≤60℃风扇关闭≥85℃切断输出(24-48V)
RTH3 ≥ 60 ℃ fan starting ≤ 60 ℃ fan off ≥ 85 ℃ cut off the output (24-48V) |
||||||||
温度系数
Temperature coefficient |
±0.03%/℃(0~50℃) | |||||||
启动、上升、保持时间
Start, rise, hold time |
200s,100ms,20ms | |||||||
抗震性
Vibration resistance |
10~500Hz, 2G 10min/周期,共60分钟,各轴
10~500Hz, 2G 10min/ period, a total of 60 minutes, each axis |
|||||||
耐压性
Pressure resistance |
输入输出间:3KVAC 输入与外壳:1.5KVAC 输出与外壳:0.5KVAC
Input / output: 3KVAC input and output and the shell casing: 1.5KVAC: 0.5KVAC |
|||||||
绝缘电阻
Insulation resistance |
输入输出间,输入与外壳,输出与外壳: 500VDC/100MΩ
Between input and output, input and output and the shell casing,: 500VDC/100M Ω |
|||||||
工作温度、湿度
Working temperature, humidity |
-10℃ ~ +50℃(参考输出特性图),20%~90RH
-10 ℃ ~ +50 ℃ (reference output characteristic diagram), 20%~90RH |
|||||||
存储温度、湿度
Storage temperature, humidity |
-20℃~+85℃, 10%~95%RH | |||||||
外形尺寸(MM)
Outline dimensions |
215*115*50 | |||||||
重量
Weight |
1.15kgs | |||||||
安全标准
Safety standards |
设计表示(Design representation)UL1950 | |||||||
EMC标准
EMC Standard |
设计表示FCC部分15J条件 等级A
Design representation of FCC part of 15J grade A |
|||||||
注(Note):
①.以上参数测试条件为:230VAC输入,额定负载,25℃ 70% Rh,湿度。 The above parameters testing condition is: 230VAC input, rated load, 25 ℃ 70% Rh, humidity. ②.容差:包括设定容差,线路稳定度,负载稳定度(注5)。 Tolerance: including setting tolerance, circuit stability, load stability (Note⑤). ③.纹波测试:20MHz用"A12"双绞线,终端用0.1uf&47uF电容器短路。 Ripple test: 20MHz "A12" twisted pair, terminal using 0.1uf&47uF capacitor short circuit. ④.进线电压稳定度测试:满负载时进线最低电压到最高电压。 Incoming line voltage stability test: full load line at the minimum voltage to the highest voltage. ⑤.负载稳定度测试:负载从0%到100%。 Load stability test: load from 0% to 100% |
付款方式︰ | TT |
---|---|
广州天鈊科技有限公司 | |
---|---|
国家/地区︰ | 广东省广州市 |
经营性质︰ | 生产商 |
联系电话︰ | 13418157878 |
联系人︰ | 陆先生 (Sales Manager) |
最后上线︰ | 2012/07/31 |