斯米克电焊条
| 型号： | - |
|---|---|
| 品牌： | - |
| 原产地： | - |
| 类别： | 工业设备 / 通用机械 / 焊接设备与材料 |
| 标签︰ | 斯米克电焊条 , 焊条 , 焊接材料 |
| 单价： |
-
|
| 最少订量： | 10 公斤 |
产品描述
| Category
类 别 |
Trade-
Mark 牌 号 |
Equivalent to China Standard
相当国标 |
Characteristics & application
特性和用途 |
Equivalent to AWS
相当AWS |
Hard-surfacing 硬 面 堆 焊 |
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件 |
|
| D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 |
ECoCr-A
|
|
| D 812
|
EDCoCr-B-03
|
HR5-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HR5-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀 |
ECoCr-B
|
|
| D 822
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53，耐热、耐磨，但抗冲击性差。堆焊锅炉旋转叶轮 |
|||
| D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨 |
ECoCr-C
|
|
| D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模 |
||
Cast iron 铸 铁 |
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫 |
ENi-Cl
|
| Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖 |
ENiFe-Cl
|
|
| Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊 |
ENiCu-B
|
|
Copper alloys 铜 合 金 |
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排 |
ECu
|
| Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSi
|
|
| Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSn-C
|
|
| Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用 |
ECuAl-A2
|
|
Aluminum alloys 铝 合 金 |
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
纯铝，耐蚀性好，但强度不高，纯铝焊接用 |
E1100
|
| Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金 |
E4043
|
|
| Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰，强度高，耐蚀。铝合金焊接用 |
E3003
|
|
Nickel alloys 镍合金 |
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
纯镍，用于镍、镍与钢的焊接与堆焊 |
ENi-1
|
| Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
镍铜，用于镍铜、镍铜与钢的焊接与堆焊 |
ENiCu-7
|
会员信息
| 上海萨福特焊材工贸有限公司 | |
|---|---|
| 国家/地区︰ | 上海市奉贤区 |
| 经营性质︰ | 贸易商 |
| 联系电话︰ | 13681871501 |
| 联系人︰ | 张国龙 (经理) |
| 最后上线︰ | 2012/12/07 |
