Features:
|
l 250 MHz IBM PowerPC Processor (350 Mips) |
l Linux operating system |
l 1 card reader |
l MPEG2 hardware decompression |
l DVB-S, DVB-C |
l V.24/RS232 interface |
l 100Mbit Ethernet interface two-way |
l 2 LED instructions |
l Unlimited number of TV / radio channel list |
l Channel switching time less than 1 second |
l Full automatic service scan |
l EPG (Electronic Program Guide) |
l Support for DiSEqC |
l Multi-lingual |
l The number of bit-stream output SPDI / F interface (AC-3 / DTS) |
l 1 European Scart plug (software control) |
|
Technical parameters: |
DBC-Tuner: |
|
l IF input :950-2150 MHz |
l Signal Level - 65 dBm .... - 25 dBm |
l Signal-to-Noise 12 dB maximum. |
l Mother of the first socket F |
l 75 ohm input impedance |
l AFC + / - 3 MHz |
l QPSK |
l The scope of input symbol rate 2 .... 45 M, SCPC / MCPC |
l Forward error correction 1 / 2, 2 / 3, 3 / 4, 5 / 6, 7 / 8, automatic |
|
Video decoder: |
l MPEG-2 and MPEG-1 compatible |
l PAL G / 25 Hz standard |
l Video proportion of 4:3 / 16:9 (automatic) |
|
Audio decoder: |
l MPEG-1 & MPEG-2 Layer I and II |
l Stereo |
l Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz |
|
Analog output: |
l Output Level L / R 0,5 Vss 600 ohm |
l TH t; 60 dB (1 kHz) |
l Isolation <-65 dB |
Digital output |
l Output Level 0,5 Vss 75 ohm |
l Sampling digital filter 32 kHz, 44.1 kHz, 48 kHz |
l S/PDIF- optical output (AC3) |
|
Video parameters: |
l Input FBAS 1 Vss + / - 0.3 dB on 75 Ohm |
l Teletext filter: ETS 300 472 standard |
|
European Scart plug: |
l Output: FBAS, RGB, S-VHS |
|
RS232 interface: |
l Bitrate 115,2 kBit / s maximum. |
l Pin SUB-D-9 |
l Firmware upgrade |
|
Ethernet port |
l I firmware upgrade network |
|
lNB power and polarisation: |
l LNB Current 500mA maximum. Short-circuit protection |
l Vertical polarization LNB voltage <14V without load,> 11.5V (400mA) |
l Horizontal polarization LNB voltage <20V without load,> 17,3 V (400mA) |
l LNB power-down standby |
|
Receive control |
l DiSEqC 1.0/1.2 SAT location / SAT Select |
l DiSEqC - motor control |
l Power consumption: <10W / 12V |
l Input voltage: DC12V, AC + / - 15% |
|
External power supply: |
l Input :110-240V AC / 50-60Hz / 0,6 A |
l Output: 12V = / 1A |
|
Physical Specification: |
l Temperature of +15 ° C. .. +35 ° C |
l Humidity <80% |
l Dimensions (W x D x H): 195 mm x 130 mm x 40 mm |