Contact type NC / NO
Nominal switching temperature (NST) 70 °C – 200 °C
Standard tolerance ±5 K
Resetting temperature (RST) Standard:
CSA:
UL:
UL:
NST 60°C - 200°C: > 35°C
NST 60°C - 200°C: RST = NST –10K to NST –50K
NST 60°C - 180°C: RST = NST – 50K ±15K
NST 185°C - 200°C° RST = NST – 65K ±15K
Operating voltage...AC /..DC ..500V~ / DC ratings available, corresponding values on inquiry
Rated Voltage (at 50Hz – 60Hz) 250 V AC (VDE,IEC,CSA) 277V (UL)
Rated current INOM (approved Values) 10 A cos j = 1.0 ; 6.3 A cos j = 0.6 10,000 switching cycles
Max. switching current at 250 V ~ 25 A (acc. Thermik test) 2,000 switching cycles
Contact bounce time < 1 ms
Impregnation resistance suitable acc. to Thermik-Test
Contact resistance < 50 mW acc. to MIL–STD. R 5757
Vibrations proof bei 10 .. 60 Hz 100 m/s²
Pressure stability of the housing 600 N max. to Thermik-Test
Basic insulation (S06/S08) Insulation cap: Mylar - Nomex ® ®: Trade mark Du Pont
Dielectric strength of the insulation cap 2 kVr.m.s
Connection leads Multi strand wire: 0.75 mm² / AWG 18
Approvals acc. to design for
VDE with reference to EN 60730-1;EN 60730-2-9 (VDE 0631)
CB**) with reference to IEC 60730-1; IEC 60730-2-9
UL with reference to 2111; UL 873