型号: | - |
---|---|
品牌: | 斯米克电焊条 |
原产地: | 中国 |
类别: | 工业设备 / 通用机械 / 焊接设备与材料 |
标签︰ | 斯米克电焊条 , 焊条 , 焊接材料 |
单价: |
-
|
最少订量: | 10 公斤 |
Category
类 别 |
Trade-
Mark 牌 号 |
Equivalent to China Standard
相当国标 |
Characteristics & application
特性和用途 |
Equivalent to AWS
相当AWS |
Hard-surfacing 硬 面 堆 焊 |
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件 |
|
D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 |
ECoCr-A
|
|
D 812
|
EDCoCr-B-03
|
HR5-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HR5-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀 |
ECoCr-B
|
|
D 822
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮 |
|||
D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50,耐热、耐磨。堆焊高温工件如热轧导轨 |
ECoCr-C
|
|
D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模 |
||
Cast iron 铸 铁 |
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫 |
ENi-Cl
|
Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖 |
ENiFe-Cl
|
|
Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊 |
ENiCu-B
|
|
Copper alloys 铜 合 金 |
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排 |
ECu
|
Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSi
|
|
Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSn-C
|
|
Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用 |
ECuAl-A2
|
|
Aluminum alloys 铝 合 金 |
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
纯铝,耐蚀性好,但强度不高,纯铝焊接用 |
E1100
|
Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金 |
E4043
|
|
Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰,强度高,耐蚀。铝合金焊接用 |
E3003
|
|
Nickel alloys 镍合金 |
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
纯镍,用于镍、镍与钢的焊接与堆焊 |
ENi-1
|
Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
镍铜,用于镍铜、镍铜与钢的焊接与堆焊 |
ENiCu-7
|
南宫市明宇合金焊条厂 | |
---|---|
国家/地区︰ | 河北省邢台市 |
经营性质︰ | 贸易商 |
联系电话︰ | 15194937759 |
联系人︰ | 焦月辉 (经理) |
最后上线︰ | 2014/06/01 |