Quick Start for Training 1:Screw shock prongs onto receiver, plug charger supplied into the DC port of receiver, charge receiver up to 3 hours for the first few times. 2: When charger is pl ing into DC port, receiver will B-Beep and Vibrate by one time to indicate charging started, at the same time the red LED light will turn on; when it was full charged the blue LED light will turn on; after the charger was unpl ed, it will B-beep and vibrate by one time, at the same time the blue LED light will go off and red LED light will continue to turn on to indicate user to communicate receiver with transmitter as soon as possible. 2:Press and hold on the On/Off button on receiver by 3 seconds, the red LED light will turn on, at the same time receiver will beep and vibrate by one time, then press any buttons on transmitter then receiver will be communicated with transmitter, and the blue Led light will flash every 10 seconds to indicate the receiver is in working condition. 3:Press the On/Off button by three times receiver will do self-test to check whether beep, vibrate and shock function are in working condition or not. 4:Put the PVC collars onto the collar holes besides receiver, adjust an appropriate length then put it around dog’s neck, then you can start to train your dog .Note: 1); Please full charge the machines before a long time no usage. 2); Small receiver is suitable to small size dog or cat. Generic Trainer GT-211 5 GT211-A1  

Transmitter Setting 1.Quick press one of three buttons will wake up transmitter if there have power remained. 2.If there’s no power remained, plug the charger supplied into the DC port of receiver, it will start to charge, at the same time the power remained icon will move from low to high to indicate charging process. 3.Quick press M button time by time will choose 0, 1, or 2 dog you want to train. 4.Press up or down M button will increase or reduce beep, vibrate and shock level. 5.Quick press B-beep, Vibrate or Shock button will lead to short B-beep, Vibrate or Shock function, press and hold on by a longer time will lead to longer B-beep, Vibrate or Shock function.