TDS-100P便携式超声波流量计技术特点：

适用于工业现场中液体流量的在线标定和巡检测量。具有操作简单、测量精度高、一致性好、可在线打印、电池供电时间长等特点。

Suitable for on-line liquid flow in the industrial field calibration and inspection measurement. Has the advantages of simple operation, high measuring precision, good consistency, The characteristics of online printing, battery power supply for a long time.

 
测量精度：优于1%；

Measurement precision: Better than 1%;

 
重复性：优于0.2%；

Repetition: Better than 0.2%;

工作电源：220VAC（标配），110VAC（可选）；

The working power supply: 220VAC (standard), 110VAC (optional);

 
测量周期：500ms(每秒2次，每个周期采集128组数据)；

The measurement cycle: 500ms (2 times per second, Each cycle, collecting 128 sets of data);

 
电   池：内置镍氢充电电池可连续工作24小时；

Battery: 24 hours of continuous work of built-in Ni MH rechargeable battery;

 
传感器安装方式：外夹式安装；

Sensor installation: Outer clip mounted;

 

添加PT100即可测量热量

 
显   示：2×10汉字背光显示器（瞬时流量/热量、累积流量/热量、信号状态等）；

Display: 2 x 10 Chinese characters (backlight display instantaneous flow, cumulative flow, signal status);

 
信号输出：隔离RS485；

The signal output: The isolation of RS485;

 
通讯协议：MODBUS协议，FUJI扩展协议，兼容国内其他厂家同类产品的通讯协议；

Communication protocol: The MODBUS protocol, FUJI protocol, compatible with similar products from other manufacturers of domestic communication protocol;

 
打印输出：内置热敏一体式打印机，实现实时或定时打印；

Print output: The built-in thermal one printer, real-time or timing print;

 
其他功能：自诊断，提示当前工作状态是否正常；

Other functions: Self diagnosis, prompt the current working state is normal;

 
可选配的传感器：外夹式，可即插即拔式接口；

The sensor can be selected: Clamp, which can plug and play interface;

 

TDS-100超声波热量计

TDS-100ultrasonic heat meter

计量冷热量。
 
测量精度：2级，满足CJ128-2007《热量表》标准；

Measurement precision: Level 2, Meet the CJ128-2007 "" standard heat meter;

 
工作电源：隔离DC8~36V或AC85~264V或3.6V/19AH锂电池；

The working power supply: The isolation of DC8~36V or AC85~264V or 3.6V/19AH lithium battery;

 
温度范围：-40~160℃；

Temperature range: -40~160℃；

 
温差范围：3~75℃；

Temperature range: 3~75℃；

 
环境等级：B级或C级；

Environmental level: B or C;

 
可选输出：1路标准隔离RS485输出；

Optional output: 1 standard isolated RS485 output;

 
         1路隔离4-20mA或0-20mA输出；

         1 isolated 4-20mA or 0-20mA output;

 
         可选HART协议；

         The optional HART protocol;

 
         双路隔离OCT输出（OCT1脉冲宽度6~1000ms之间可编程，默认200ms）；

         Dual isolated output (OCT OCT1 pulse width 6~1000ms programmable, the default 200ms);

 
         1路双向串行外设通用接口，可以直接通过串联的形式连接多个,诸如4-20毫安模拟输出板、频率信号输出板、热敏打印机、数据记录仪等外部设备；

         1 two-way serial peripheral interface, can be directly through the series connected in the form of a plurality of, Such as 4-20 mA analog output plate, frequency signal output board, thermal printers, data recorder and other external devices;

 
其他功能：自动记忆前512天，前128个月，前10年正负净累积流量；自动记忆前30次上、断电时间和流量并可实现自动或手动补加，并可以通过MODBUS协议读出；

Other functions: Automatic memory 512 days ago, the first 128 months, before 10 years of positive and negative net cumulative flow; Automatic memory before 30 time, breaking time and the flow and can realize the automatic or manual feeding, and can be read by MODBUS protocol;

 
流量传感器：外夹式、插入式和管段式；

Flow sensor: The clamp type, insert type and pipe type;

温度传感器：PT100或PT1000铂电阻；

Temperature sensor：PT100 or PT1000 platinum resistance;

 
2、传感器   Sensor

①外夹式传感器：标准M型、S型、L型、SG型、MG型;

The clamp type sensor: The standard M type, S type, L type, SG type, MG type;

 
安装无需断流，无压力损失；

Installation without stop, no pressure loss;

 
精度±1%；

Accuracy of ± 1%;

 
安装维修方便，用户可自行安装；

Convenient installation and repair, a user can install;

 
价格最低，与测量口径有关；

The lowest price, with the measurement aperture;

 
适合于工况条件较好的环境；

Suitable for working conditions better environment;

 
②CR插入式传感器

CR Insert type sensor

 
安装无需断流，可带压安装，无压力损失；

Installation without interruption, with pressure mounting, no pressure loss;

 
精度±1%

Accuracy of ± 1%

 
用户需经培训后，采用专用开孔器才能自行安装；

The user must after training, the special opening device to install;

 
价格较高，与测量口径无关；

The price is higher, has nothing to do with the measuring aperture;

 
接收信号良好，长期运行稳定、可靠。

The received signal is good, long-term stable operation, reliable.

 
③管段式传感器

Pipe type sensor

 
安装需断管、断流，无压力损失

Installation of pipe break, break, no pressure loss

 
精度0.5%

The accuracy of 0.5%

 
安装维修需断流，用户可自行安装

Install the repair to stop, a user can install

 
测量口径越大，价格越高

Measurement of the larger diameter, the higher the price

 
精度最高，接受信号良好，长期运行稳定可靠

The highest accuracy, the received signal is good, long-term stable operation