~COLASIT - Heat Exchanger for aggressive air, gases and vapour

          克拉斯 – 适用于腐蚀性气体，蒸汽的热交换器
  

    There are no corrosion problems with the COLASIT heat exchanger made entirely of plastic.

          克拉斯热交换器由热塑塑料制成，没有被腐蚀的烦恼。

 Each COLASIT heat exchanger is sized on an individual basis. Please give us your design data.
 You will immediately get our detailed offer.

       每个热交换器按客户要求定制，您只需提出设计数据，我们会做出完整的设计方案。

 All COLASIT heat exchangers are assembled from a modular system. The sizing is determined mainly
 by gas flow rate and temperature and, to a lesser extent, by the prefabricated parts.

      克拉斯的热交换器都通过模拟系统安装完成，型号主要取决于气体流量，温度等。很少情况下，事先固定的部件
      会影响换热器的整体尺寸。

  Two choices of tube clearance are available, 5 mm for clean and 12 mm for waste gases.

           套管间隙有2种尺寸可选：5 mm, 洁净气体； 12 mm, 废气

COLASIT heat exchangers are cleaned by means of pressurized water or, if necessary, by use of chemical detergents. The high degree of corrosion resistance allows chemical cleaning of the COLASIT heat
 exchanger.

          热交换器用增压水清洗，必要时用洗涤剂清洗。克拉斯热交换器优良的耐腐蚀性允许其用化学清洗剂清洗。