TL-ST 不锈钢液位传感器

产品描述

用于探测油箱或水箱及污水箱的液位，通过浮桶内的磁石产生的磁场驱动相应的电路，输出相应的电阻值，提供给仪表显示当前液位。具有性能稳定，易于安装等优点。传感器长度、电线长度和阻值范围可根据客户的需求而设计。

产品规格︰	Length Measurement: Sending Unit length should be a minimum of 5cm less than the plastic tank depth、and 5 cm less than the metal tank depth. Note: If metal tank surface flexes、deduct 5 cm from the depth. (like plastic tank) Lengths Available: 10 cm through 200 cm with 2.5 increments. Sensor unit lengths、are measured from the top of the threads to probe tip. Material: 316 Type Stainless Steel and operate on a vertical plane (no float arm). Mounting Method: 1.5" NPT.1.5 ” NPT, American pipe thread, male,240 – 30 ohm operation Special Application Senders: For Dual Station、Special ohms ranges (other than 240-30 ohms)、Calibrated、Custom、Adjusted、or Special application units、contact us at by one of the means listed above.
最小订购量︰	50 pcs
产品交期︰	现货供应