TX1透亮型抛光粉 Bright type polishing powder

品牌:净魅

 透亮型抛光粉呈松散黄色粉末，高表面活性，环保安全。适用于大理石，石灰石等含钙量多的石材，翻新结晶后的板材表面光感通透油润，色泽饱满有厚度，光泽度高，板面硬度提高，耐磨损，耐粉化不易退光，含热塑性成膜树脂对细小毛孔和疏松表面有填充功能。

适用范围：天然大理石(米黄系列、莎安娜、黄洞石、啡网等)

使用方法：

1.将不平整的地面研磨至1500#以上, 把TX01透亮型抛光粉倒于地上，加上比例清水。用晶面处理机配百洁垫将抛光粉磨成浆状，来回约12-16频次。待石材表面出光后刮去表面多余粉浆，根据环境特质可用清水冲洗干净石材表面然后吸干。

2.如需更高光泽可加少量多功能结晶膏配合百洁垫重新抛磨，进行最后的润色处理。可加大晶面硬度和光泽度。经过晶面处理的大理石表面光滑如新，光泽度可以达到90度以上。

包装规格：5KG/桶；20KG/桶

Translucent type polishing powder is a loose yellow powder, high surface activity, environmental safety. Suitable for marble, limestone and other more calcium stone renovation crystallization plate surface after the light-sensitive transparent oily, full color, thickness, gloss, plate surface hardness, wear resistance, easy chalking back light, comprising a thermoplastic film-forming resin on the surface of fine pores and loose-fill feature.

Scope: Natural marble (beige series, ROYAL, yellow travertine, Emperador, etc.)

Instructions:

1. The uneven floors above ground to # 1500, the TX01 translucent type polishing powder fell on the ground, with the proportion of water. Crystal plane processor equipped with scouring pad grinding to polishing slurry back and forth for about 12-16 frequency. Until the stone surface of the rear surface of the light scrape excess slip, according to the environmental characteristics of the stone surface clean and rinse with water and then dry.

2. For a higher gloss can add a small amount of cream with crystallized multifunction scouring pad re-polishing, the final touches processing. Can increase the crystal surface hardness and gloss. Marble crystal surface treatment after the surface smooth as new, gloss up to 90 degrees.

Precautions:

1. Suitable placed in a cool ventilated place, avoid sun exposure.

2. Avoid contact with skin and eyes, away from children's reach.