英文语言版藤仓88S光纤熔接机

型号：	88S
品牌：	FUJIKURA
原产地：	日本
类别：	电子、电力 / 通信和广播电视设备 / 网络通信设备
标签︰	88S , FUJIKURA , 英文版藤仓熔接机
单价：	¥31000 / 件
最少订量：	1 件

发送查询

产品描述

英文版88S藤仓光纤熔接机产品特点

80s/70s 机型的全新升级版，再续一代经典

Fujikura 88S 熔接机是一款高精度低损耗的熔接机，具备先进的自动化结构并搭载独特的智能刀片管理技术。作为藤仓最新款的熔接机，88S本身性能也是世界顶级层次，搭配最新设计的携带箱和工作台，使它成为远超前代的全新升级版单芯光纤熔接机。

屏幕尺寸 5英寸

熔接时间 7秒

满电熔接加热循环 300次

电极棒寿命5000芯以上

熔接记录储存 20000个

智能刀片管理系统

大容量电池

7秒完成熔接，9秒完成加热

大屏显示

强大的自动化功能

光纤固定夹功能

免工具更换电极棒

88s藤仓光纤熔接机技术参数

光纤对准方式	纤芯对准
适用光纤类型	SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF/UBIF(G.657)
包层/涂覆层直径	80~150μm / 100μm~3mm
光纤切割长度	5~16mm
熔接/加热模式	100个熔接模式和30个加热模式
平均熔接损耗	0.02dB (SMF), 0.01dB(MMF), 0.04dB(DSF), 0.04dB(NZDSF)
熔接时间	ULTRA FAST模式：6秒，SM FAST模式：7秒，SM AUTO模式：10秒
加热时间	250μm涂覆直径，Slim60mm/40mm套管：15秒 250μm涂覆直径，FP-03套管：23秒 900μm涂覆直径，FP-03套管：25秒
熔接结果存储	15000个最新记录，100个熔接图像
光纤观察方式和放大倍数	两轴观测4.73”彩色液晶显示器，320倍放大倍数，熔接完成后可放大400
拉力试验	1.96~2.25N
对应热缩套管	60mm, 40mm和其它微型热缩套管
电池熔接加热次数	4000mAh BTR-09锂电池充满电可以维持200次的熔接加热
电极棒寿命	熔接5000芯以上
尺寸/重量	146W x 163D x 148H (mm) / 2.6kg (含电池)
通信接口	Mini-USB用于PC连接
操作条件	海拔：0~5,000m，风速：15m/s，温度：-10~+50℃，湿度：0~95%RH
三防性能	防震：76cm高度的5面向下坠落
	防雨：降水量在10mm/hr的情况下10分钟
	防尘：暴露于灰尘中（0.1~500μm大小的硅酸铝颗粒）

eatures:

Splicing time: 7-9 sec (SM FAST mode).
Heat time: 13-15 sec (for 60 mm sleeves).
Core alignment technology.
Advanced image processing technology.
Fiber discrimination function.
The faster automated features.
Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
Easy fiber protection sleeve positioning.
The lid of the carrying case may be used as a work table.
Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
The sheath clamp is compatible with loose tube fiber.
Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
The tool can connect two cleavers simultaneously.
Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
Operation manual is installed into the splicer.
Battery life increased up to 500 recharge cycles.
Increased electrode lifetime – up to 5000 splicing cycles with one set.
5-inch color TFT touch screen display.

SPECIFICATIONS:

Fiber alignment method	Active core alignment
Fiber count	Single fiber
Fiber type	Single mode, Multi mode
Cladding dia.	80 to 150μm
Sheath clamp	Coating dia. : Max. 3,000μm
Sheath clamp	Cleave length : 5 to 16mm
Splice loss	G.652: 0.02dB, G.651: 0.01dB, G.653: 0.04dB, G.655: 0.04dB, G.657: 0.02dB
Splice time	SM FAST mode: 7 to 9sec. AUTO mode: 14 to 16sec.
Protection sleeve	Length: 66mm; dia.: Max. 6.0mm before shrinking
Heat time	60mm slim mode : 9 to 10sec. 60mm mode : 13 to 15sec.
Fiber tensile test force	Approx. 2.0N
Electrode life	5,000 splices
Dimensions	170W x 173D x 150H (mm)
Weight	2.8kg including battery
Environmental condition	Operate: temperature : -40 to 80 degree; Humidity: 0 to 95% non-condensing; Storage: temperature : -10 to 50 degree; Humidity: 0 to 95% non-condensing; Altitude: Max. 5,000m
AC adaptor Input	AC100 to 240V, 50/60Hz, Max. 1.5A
Battery	Rechargeable Lithium Ion Output Approx. DC14.4V / 6,380mAh Capacity 300 splice and heat cycles Temperature Recharge : 0 to 30 degree, Storage : -20 to 30 degree
LCD monitor	TFT 5 inches with touch screen
Magnification	200 to 320x Illumination
Illumination	LED lamp
Interface	PC: USB 2.0 Mini B type External LED lamp: USB2.0 A, Approx. DC5V, 500mA Ribbon Stripper: Mini DIN 6pin DC12V, Max. 1A Wireless: Bluetooth 4.1 LE
Data storage	Splice mode: 100; Heat mode: 30; Splice result: 20,000; image 100 images

Standard Package:

88S Splicer, Battery pack, AC adapter, AC power cord, USB cable, Fusion splicer srap, Electrodes(spare), Fiber holder set plate, Carrying case, Work tray, Tripod screw, Carrying case strap, Alcohol dispenser, Quick reference guide, Stripper, CT08 Cleaver