--- 产品详情 ---

The HI-8598 is the world’s first galvanically isolated ARINC 429 line driver, available in a compact 18-pin SOIC plastic package. The device uses a patented capacitive isolation and power regulation to provide 800V galvanic isolation between the analog line driver and the logic interface, ensuring isolation between the ARINC 429 data bus and sensitive digital circuitry. This device is intended for use in safety critical systems, where it is essential to completely isolate any faults on the bus from mission critical electronics, making the HI-8598 a good choice for systems that will ultimately require FAA or EASA DO-254 DAL A certification. 

The HI-8598 line driver converts logic signals to ARINC 429 levels (such as when using an FPGA or Holt’s HI-3220 or HI-35860 ARINC 429 protocol ICs). The logic inputs feature built-in 4kV ESD input protection (HBM) as well 3.3V logic level compatibility. 37.5 Ohm or 5 Ohm resistors in series with each ARINC output are available to allow the use of external resistors for lightning protection.

The part is available in Industrial -40oC to +85oC, or Extended, -55oC to +125oC temperature ranges. Optional burn-in is available on the extended temperature range. 

HI-8598PSMF 特点 HOLT代理商华沣恒霖电子 如想了解价格 货期等具体信息欢迎联系黄云艳

符合空客ABD0100H规范

电流隔离ARINC 429线路驱动器在模拟线路驱动器和逻辑接口之间提供800V隔离

兼容3.3V逻辑电源

片上生成的所有ARINC 429电压电平

数字可选的上升和下降时间

5欧姆或37.5欧姆输出电阻

工业和扩展温度范围

提供老化

HI-8598PSMF 应用程序  HOLT代理商华沣恒霖电子 如想了解价格 货期等具体信息欢迎联系黄云艳

航空电子数据通信

容错、安全关键的ARINC 429系统

ARINC 429数据总线与数字逻辑电路的隔离

互补式金属氧化物半导体/TTL到ARINC 429电平转换