透明双组份电子灌封硅胶

透明双组份电子灌封硅胶
型号:SI8125
品牌:maxtech
原产地:中国
类别:化工 / 胶黏剂
标签︰透明硅胶 , 电子硅胶 , 硅胶
单价: ¥60 / kg
最少订量:1000 kg

产品描述

Two Component Silicone Potting Adhesive

SI8125A/B

 

Technical Data Table

PROPERTY

UNITS

PART A

PART B

----

----

8125T

8125M

8125W

8125W-1

8125B

8125T

8125

Color

Visual inspection

Colorless transparent fluid

Matte transparent white fluid

White fluid

White low viscosity fluid

Black fluid

Colorless fluid

Colorless fluid

Viscosity

25°C, cps

1000~1,300

1,800

3,500

2,100

1,400~2,000

 

20-50

20-50

Density

25°C, g/cm3

1.02

1.03

1.18

1.18

1.18

0.98

0.98

Corresponding curing agent (Part B)

8125T

8125T

8125

8125

8125

---

---

Mixture/mass ratio

----

A:B=100: (10±3)

Viscosity of mixture

25°C, cps

1,000

1,000

2,300

1,500

1,200

---

---

Operation time

25°C, min

40

40

40

50

40

---

---

The operation time can be adjusted with the proportion of hardener part B.

Surface hardening time, min

70~180

Characteristics after curing

Cured appearance

----

Colorless transparent elastomer

Matte white elastomer

White elastomer

 

White elastomer

Black elastomer

---

---

Hardness

Shore A

21

21

28

15

12

---

---

Tensile strength

MPa

1.0

1.0

1.2

1.2

1.2

---

---

Shear strength

MPa

0.3

0.3

0.7

0.7

0.7

---

---

Loss factor

1 MHz

0.008

Dielectric strength

kV/mm, 25°C

20

Volume resistance

DC500V, Ω·CM

1.1×1015

Dielectric constant

1 MHz

3.00

Long-term apply temperature

°C

-50~150

 

 

Product Description

SI8125A/B is used in potting protection of varied components. It can vulcanize to deep layer. The two components have a good fluidity after mixing. The operation time can be adjusted with the proportion of hardener part B. It can bond well with most materials without using any primer. It can be used to fix the accessories to resist water, dust and leakage of electricity.

.

Typical Applications

Used for Automotive electronics, modules like Power control modules, Solar modules, Junction box, LED spotlight, Wall washer light, Strip lights, LED fluorescent lamp, etc.

 

Key Features

Two-component high transparency liquid silicone rubber, condensation dealcoholization type

Low viscosity, easy to process and operate

Low hardening condensation, no corrosion and stressless

Excellent electric insulativity and stability in high temperature 

Excellent bonding ability, good water-proof and moisture-proof property

 

Packing Specification

  • SI8125T,Transparentcode0104020

Part A10kg/drum   Part B 1kg/pot

  • SI8125M, Matte transparent whitecode0104050

Part A10kg/drum   Part B 1kg/pot

  • SI8125B , blackcode0104000

Part A10kg/drum   Part B 1kg/pot

  • SI8125W, whitecode0104010

Part A10kg/drum   Part B 1kg/pot

  • SI8125W-1,White low viscositycode0104040

Part A10kg/drum   Part B 1kg/pot

  • Customized packing

 

 

Transport &Storage

When stored at or below 25°C in the original unopened containers, this product has a usable life of 12 months from the date of production.

It’s non-dangerous goods, can be transported as normal chemicals, CAUTION leakage during transport.

 

.Directions for Use

Mix Part A and Part B by 100:10 mass ratio, after evenly mixed, pouring directly into the components or modules as per requirements. Its recommended to slowly pour along the walls of the implements, so as to reduce the bubbles happens.

Still the potted component to let out the bubbles. Vacuum defoaming process of the mixture before potting can improve the performance.

 

Attention of operation

Keep away from Children

Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.

 It is forbidden to build on the surface of the wet substrate.

 

 

  Typical Applications

Applications

LED modules \Lamps

PV modules/Junction box

Automobile / Power modules

Operation timemin

50

25

45

Curing timehour

5

L2.5

5

 

Safety Operation Data

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from MAXTECH or other distributors, or mail to service center maxtech@shmaxtech.com

Warranty and Liability

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advice we supply don't apply in any circumstances. MAXTECH don't make assurance of any other applications outside the specification until MAXTECH supply a special written guarantee. MAXTECH is only responsible to replace or refund if this product is defective within the warranty period stated above. MAXTECH makes it clear that will not be liable of any accidents.

 

 

 

透明双组份电子灌封硅胶 1透明双组份电子灌封硅胶 2透明双组份电子灌封硅胶 3透明双组份电子灌封硅胶 4透明双组份电子灌封硅胶 5

会员信息

上海群劢科技有限公司
国家/地区︰上海市闵行区
经营性质︰生产商
联系电话︰18321208486
联系人︰Sally (经理)
最后上线︰2024/07/29