平行刮平砖面，调节砖坯厚度。本产品非常锋利，噪音极小，对砖坯压力小，电流小。
注意：
（1）适当选择不同粒度滚筒排列以达到最佳刮削效果
（2）必须控制滚筒轴线和底板的平行度小于0.05mm
（3）冷却水必须充足
(规格可以根据客户的来图和来样加工)
Mainly to parallel and polish the surface of tiles, adjust the thickness of the tiles. It is high sharpness, low voice, low pressure and current for the tiles.
Notice:
(1) in order to produce a smooth effect, the choice of grits should be suitable
(2)the parallelism between the roller’s axis and floor must be less than 0.05mm
(3) cold water must be adequate
（Specification can be adjusted according to customer’s specific requirements.）