Description:
The Tech-2 is the same tester GM Technicians use to diagnose GM

vehicles. The Vetronix Tech 2 comes with Authentic GM software and

provides support for on-board diagnostics on all GM systems 1992 thru 2007
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive

diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool

obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your

Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later

review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional

control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
Dimensions: 12??
Microprocessor: 32 bit, 16 MHz
Memory: 32 MB flash type II PCMCIA. Type III slot available for future

expansion.
Communications: Integral RS232 communication port.
Screen: 3.8?.8 backlit monochrome with full graphics capability: 320?40

pixels. Displays up to 9 vehicle parameters at once


Download Tech2 Brochure (5.2 Mb)
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and

NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download (

199.2 kb )
GM aftermarket Expertec TIS software on CD-ROM disks
Hardware lock to open SPS programming in TIS 2000
RS232 cable and user's manual.
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
Tech-2 Users Manual download ( 3.9 Mb )
Tech-2 Flash Registration Card
An industry change in protocol from OBD II to Controller Area Network (CAN)

has begun. In order to perform diagnostics on a vehicle that uses the CAN

interface; you will need the Tech 2 Flash and a CAN diagnostic interface

module. The module connects between the Tech 2 Flashs diagnostic link

cable and the OBD adapter. Once the module is connected, it can be used

on all GM vehicle applications, even those vehicles using other platforms

such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)