Ⅰ、Brief Description

产品简述

PLATIVE PPC7703, the peelable protective paint, is specialized applied to silk screen printing, pad printing, spraying, and so on. acid or alkali resistance, corrosion resistance, good adhesion, and fast-drying, peeling easy.

PLATIVE PPC7703 可撕保护漆，专门开发应用于丝印移印喷涂等加工过程的保护作用，耐酸碱，耐侵蚀，附着力好，快干，方便剥离。

Ⅱ、Operational Guidance

操作向导

         First, to clean and dry the surface, make sure no grease, no dust. Second, to paint the surface where prevent from printing next (ALATIVE T7701 can be used to dilute the product). Then, forced dry at 70 ℃ before printing. After printing, the coating can be manual stripping, or peeled with adhesive tape.

先清洁并干燥工件表面，确定无油污、无灰尘；再将PLATIVE PPC7703涂于需保护位置（可用ALATIVE T7701稀释至需要稠度） ；然后70℃烘干，即可进行印刷加工；加工后，PLATIVE PPC7703涂层可手工剥离，或者用胶带粘离。

Ⅲ、Annotation

附注

         Before use, low-speed mixing uniform of PLATIVE PPC7703 is required; dilute the product with special additives ALATIVE T7701,or else it could lead to paint deterioration; the film with a certain thickness, is in order to peeling easy after printing.

PLATIVE PPC7703使用前，需低速搅拌均匀；稀释时请使用专用添加剂T7701，否则可能导致油漆变质；涂膜需有一定厚度，印刷加工后剥离。