TOP BEST-668汽车不干胶

TOP BEST-668 Automotive gap-filling butyl sealant

一、产品概述：
TOP BEST-668是一种单组份、具有永久不固化性的中性密封胶。具有优良的气密性、耐候性。

1、Description

TOP BEST-668 is a type of netural, one-component ,permanent non-solidation sealing material , it shows good performance on air-tightness, weather resistance .

二、适用范围：

车身橡塑密封条中的沟槽内，起到密封防水、防尘等作用。

2、Application area

Gasket, gap-filling for automotive doors, windows, inside and outside panels, etc.

三、产品特点：

1） 高温不流淌，低温易挤出。

2） 温度敏感性小，密封性、耐候性好。

3、Advantage

(1)    No flowing under high temperature, easy to extrude under low temperature.

(2)    Good performance on sealing and water resistance, small temperature-sensitive.

四、包装：

5加伦；55加伦铁桶装。

4、Package

5&55 gallons steel keg.

五、施工方法：

打胶泵在线涂胶，随现场温度的不同，可采用控制打胶泵的气压来控制出胶的量和直径。

5、Usage

On line applying with the sealant pump, the application surface should be clean, dry and oil-free. The operating temperature should be within 10℃-35℃.Adjust the pressure of the pump according to deferent temperature to control the diameter of the sealant.

六、储存有效期：

建议储存温度：15℃-25℃，有效期自原包装日起12个月。

6、Storage

Storage temperature: 15℃-25℃，12months.