液体收集器LIQUID COLLECTOR(OIL COLL (中国浙江省生产商) - 化工设备

液体收集器LIQUID COLLECTOR(OIL COLL

没有图片

液体收集器主要功能是液体收集与气体再分布。在液体收集器的设计方面主要考虑以下几点因素：

1、缩短液体停留时间，防止液体局部滞留

2、促进气体均匀分布，气体阻力小

3、设计结构：强度大，抗热胀冷缩

4、现场焊接量小

The major function of the liquid collector is collecting the liquid and re-distributing the gas.

The following factors were put into consideration when New Century Group conducted the designing of the liquid collector:

1．Shortenthe time for the liquid's stay and prevent the holdup of liquid at certain places

2．Promote the homogenous distrlbutlon of gas，and gas resistance shall be small.

3．Designed structure：high strength and prevent the expansion and extraction caused by heat and coldness．

4．Small site welding work．

根据以上设计思想，收集器一般采用如下设计形式：

1、采用条形升气孔，开孔率较大，气体阻力较小，

同时易于现场安装；

2、主槽抽出设计，减小液体的停留时间，防止液体结焦；

3、支槽向中心倾斜，促进液体流动，消除液体滞留；

4、结构合理，抗气体冲击，抗热胀冷缩。

According to the above-mentioned designing guideline,the collector generally takes the following designs:

1．Bar-shaped gas-lifting holes are adopted，which increase the number of holes and reduces the gas resistance．It is

easy to be mounted at site．

2．The main tank is designed in a way that it can be extracted，which reduces the time forthe liquid to stay and prevents

the

liquid coking．

3．The branch tank leans toward the center，which promotes the floe of liquid and prevents the holdup of liquid．

4．The structure is reasonable and prevents the gas impacts and the expansion and extracts under heat and coldness．