快速换模系统具有如下优点：
一、 安装简便，在安装过程中注塑机无需任何改变。
二、 安全系数高，磁力强，断电不断磁，磁力不随时间及温度的影响而消失或减退。

三、 使用快速换模系统，可大大地提高换模效率，减少换模时间

四、 该专用磁盘厚度约为5-6cm，占用的空间小，不影响注塑机的开模空间。
五、 操作简便，任何非专业人员只需经过1分钟左右的培训即可熟练操作。

The rapid mold-change system has the following advantages.
I. Simple installation, Injection molding machine doesn’t need any change when installation process.  .
II. High safety efficiency:  Strong magnetic force, keep magnetic when power outage. Magnetic force will not disappear or decline under the influences of time and temperature.  
III. Rapid mold-change system can greatly improve mold-change efficiency and reduce mold-change time.
IV. The thickness of the special disk is about 5-6cm, which occupies small space and will not affect mold opening space of the injection molding machine;
V. Convenient operation: Any non-professional personnel can operate expertly after training for about 1 minute.