1.Standard Operating Conditions工作条件:
1-1  Rated Voltage： 6.0V DC constant between motor terminals
     额定电压： 马达端子电压6.0直流电压
1-2  Direction of Rotation：   CW when viewed from output shaft side
     回转方向： CW 从出力轴端观看
1-3  Operating Temperature and Humidity Temperature range of -10℃~+50℃, Humidity range of 30%~80%温度范围是-10℃~+50℃
工作温度及湿度 
      湿度范围是30%~80%
1-4  Storage Temperature Temperature range of -20℃~+60℃
     贮藏温度 温度范围是-20℃~+60℃
2.Measuring Conditions:测量条件

2-1  Motor Position: To be place t horizontally when measuring
     马达放置位置 测试时水平放置
2-2  Power Supply:   Regulated DC power supply
     电源 直流稳压电源
2-3  Environmental Temperature and Humidity:  Temperature range of 15℃ to 30℃

      环境温度及相对湿度 Relative humidity 30%and 70%
3.Electrical Characteristics (at initial stage after 30 seconds run-in)电气性能

3-1  No Load Current:空载电流 0.17A MAX
3-2  No Load Speed:空载转速 9800±10%rpm
3-3  Starting Voltage:起动电压  /  V Max
3-4  Rated Load:额定负载  23.0  g.cm
3-5  Rated Load Current:负载电流  0.6A max
3-6  Rated Load Speed:负载转速 7700±10%  rpm 
3-7  Motor Performance Curve马达曲线参数 Attached motor characteristics curve